Description

Package Included
1 x PCI-E 16X Adapter
1 x PCI-E 1X Riser Board
1 x 60CM USB 3.0 Cable

Features
1.Model: VER 008S
2.Graphics power supply using 4 270UF solid state capacitors, more secure, more efficient and more practical
3.Transfer car with large 4PIN + SATA + graphics card 6PIN interface, plug to a power supply can work properly, so that the graphics card independent from the motherboard,  to reduce burden of the motherboard board
4.Card slot is right direction to facilitate the 2U chassis wiring, the use of the original slot card connector, graphics card and connector contact better
5.PCI-E connector uses a multi-layer shielded wire, the longest can be connected to the 3M without signal attenuation
6.USB cable is soft and stable, easy to track, graphics cards can be placed at will
7.Slot equipped with fixed buckle, more convenient to remove the graphics card and fixed graphics card, graphics card will not fall off from the slot
8.PCI-E connector with multi-layer shielded wire, the longest can connect 3 Meters the signal will not attenuate, to ensure signal integrity

Specifications
1.Power Connector: 6 pin power cable
2.The board size: 12.7cmx4.2cm
3.USB Cable Length :60cm
4.Compatible Use: For any 8 GPU graphics cards
5.Transfer Speed: 1000 (MB / s)
6.Chip: 1084
7.OEM: Support
8.Power: 12V 5A
9.Capacitors: 270Ufx4

Notes
1. This extension cable is for the motherboard PCI-E slot (1X, 2X, 4X, 8X, 16X). Please plug in the floppy drive power cord when using it. The PCI-E extension cable must be broken when the computer and then plug the wire, the notes must be read when use!
2. The wire is customized, please do not just plug in at will!
3. When insert the line the direction must be clear, do not plug or insert offset, to prevent burn equipment; plug the device first and then plug the line, to avoid excessive force socket socket interrupted.
4. Dual-core graphics recommended using the old cable, the motherboard is 16X also recommended the old cable!