These control arms are made from carbon steel with polyurethane bushings. Eliminate wheel hop, steering wander and increase traction with an easy bolt on installation. 100% TIG welded for the ultimate in strength and appearance. These control arms are built with an offset to provide maximum tire clearance. When running larger tires they can rub against the stock control arms at full steering lock, our offset design eliminates this problem. You must to have these when you lift the vehicle 2" or more!
Lifetime Warranty against any material or workmanship defect, please contact us first if there is an issue
Determine your lift kit requirements based off current stock heights (displayed in green) for both front and rear by measuring from the ground to the bottom of your vehicle's flare.
Level to your stock rear measurements by adding appropriate lift to the front of your vehicle.
Add to both front and rear equally to gain lift while retaining the stock appearance.
Achieve a leveled lift by adding to both front and rear while accounting for the stock difference.
Front Lift Kit | Rear Lift w/ Overload | Sway Bar Drop |
---|---|---|
Track Bar | Sway Bar End Link | Pitman Arm |
Upper+Lower Control Arm | Panhard Track Bar | Steering Gear Box Stabilzer |
Bump Stop | Driveshaft Shim Carrier Bearing Drop |
|