USB to Dual PS2 Converter White Cable
Supports PS/2 devices (keyboard or mouse) and converts to the USB interface.
USB plug and play compatible.
Compatible with USB 3.0, USB 2.0, USB 1.1 ports.
Support Windows 98/SE/ME/2000/XP and Mac OS9.0/OSX/Linux
Total Length:32cm
Color:as picture shows
USB plug and play compatible.
Compatible with USB 3.0, USB 2.0, USB 1.1 ports.
Support Windows 98/SE/ME/2000/XP and Mac OS9.0/OSX/Linux
Total Length:32cm
Color:as picture shows
USB to Dual PS2 Converter Black Cable
Supports both UHCI and OHCI specifications.
Converts dual PS/2 devices (Keyboard & Mouse) to 1 USB port!
Supports computer USB interface to PS/2 port of KVM Switch.
USB Bus Powered, no power adapter is needed!
Fully compliant with PS/2 keyboard & mouse
Support USB and PS/2 Plug and Play
Support standard windows multimedia keys, Easy to install.
Converts dual PS/2 devices (Keyboard & Mouse) to 1 USB port!
Supports computer USB interface to PS/2 port of KVM Switch.
USB Bus Powered, no power adapter is needed!
Fully compliant with PS/2 keyboard & mouse
Support USB and PS/2 Plug and Play
Support standard windows multimedia keys, Easy to install.
USB to Dual PS2 Converter Head
This USB to dual PS/2 connector adapter takes up one USB port and gives you two PS/2 ports for your old mouse and keyboard.
Allows you to use your PS/2 compatible mouse and keyboard as USB compatible device.
Fully compliant with PS/2 keyboard/mouse.
Type: USB to PS/2 Adapter
Material: Plastic Cover
Male: USB
Female: Dual PS/2
Support: for Windows 98SE/ME/2000/XP, for Netware 4.11 above, for HP Unix，for Linux, for Mac OSX(10.2-), for Mac OS9.1-9.X
Features: Plug and Play, No Need to Install Drivers, USB Bus Powered
Allows you to use your PS/2 compatible mouse and keyboard as USB compatible device.
Fully compliant with PS/2 keyboard/mouse.
Type: USB to PS/2 Adapter
Material: Plastic Cover
Male: USB
Female: Dual PS/2
Support: for Windows 98SE/ME/2000/XP, for Netware 4.11 above, for HP Unix，for Linux, for Mac OSX(10.2-), for Mac OS9.1-9.X
Features: Plug and Play, No Need to Install Drivers, USB Bus Powered
Dual PS2 To PC USB
Features:
1. Plug and Play
2. Supports 2 Controllers
3. Convert your PS2 and PSX controller, Gun, Dance Pad to use on your PC
4. Supports all buttons on your PlayStation controller / DDR Dance Pad
5. Supports Shock Real Vibration Function on supported games
6. Supports Both Digital and Analog modes
7. DDR dancing controller is compatible,push "start + select + up" for 3 seconds, it will switch to PS/PS2 dancing pad mould automatically.
8. Build-in flashing signal indicator
9. Compatible with Windows 98 / 98SE / ME / 2000 / XP, together with the DirectX 7.0a or above
10.USB1.1/1.0/2.0 is compatible
Size : 8.5 x 7 x 2 cm ( USB Cable length: about 55cm)
1. Plug and Play
2. Supports 2 Controllers
3. Convert your PS2 and PSX controller, Gun, Dance Pad to use on your PC
4. Supports all buttons on your PlayStation controller / DDR Dance Pad
5. Supports Shock Real Vibration Function on supported games
6. Supports Both Digital and Analog modes
7. DDR dancing controller is compatible,push "start + select + up" for 3 seconds, it will switch to PS/PS2 dancing pad mould automatically.
8. Build-in flashing signal indicator
9. Compatible with Windows 98 / 98SE / ME / 2000 / XP, together with the DirectX 7.0a or above
10.USB1.1/1.0/2.0 is compatible
Size : 8.5 x 7 x 2 cm ( USB Cable length: about 55cm)
PS2 Adapter
The PS/2 Adapter enables you to connect a PS2 device to the Arduino mainboards. With the help of PS2Keyboard library, you can create the bridge between these PS2 keyboard and the Arduino.
Standard PS/2 interface;
Power Supply should be 5V DC;
4 screw mounting holes whose diameter is 2.2mm
Interface:
Control interface: A total of four pins (GND, VCC, DAT, CLK), GND to ground, VCC is the power supply, DAT is data input and output pin, CLK is the clock signal pin.
PS/2 socket: Standard PS/2 interface.
Mounting hole: 4 screw mounting holes whose diameter is 2.2mm, so that the module is easy to install, easy to combine with other modules.
Standard PS/2 interface;
Power Supply should be 5V DC;
4 screw mounting holes whose diameter is 2.2mm
Interface:
Control interface: A total of four pins (GND, VCC, DAT, CLK), GND to ground, VCC is the power supply, DAT is data input and output pin, CLK is the clock signal pin.
PS/2 socket: Standard PS/2 interface.
Mounting hole: 4 screw mounting holes whose diameter is 2.2mm, so that the module is easy to install, easy to combine with other modules.
PS2 Driver Module
Performance parameter:
Working voltage:DC5V;
Key information is sent out by serial(Baud rate 19200) and parallel
Corresponding speed;
Apply to PC PS2 keyboard.
Module size: 39.1mm(length)*31.2mm(width)*18mm(high)
Working voltage:DC5V;
Key information is sent out by serial(Baud rate 19200) and parallel
Corresponding speed;
Apply to PC PS2 keyboard.
Module size: 39.1mm(length)*31.2mm(width)*18mm(high)
Matters need attention:
1.TWI/IIC address is 4. Modules for the host.
2.Do not use the TWI/IIC should be “IIC/TWI enable” Short circuit cap to remove. Otherwi se the module will not be able to work properly
3. *UART Baud rate: 19200
1.TWI/IIC address is 4. Modules for the host.
2.Do not use the TWI/IIC should be “IIC/TWI enable” Short circuit cap to remove. Otherwi se the module will not be able to work properly
3. *UART Baud rate: 19200
Application : Robot ,Electronic products,and so on
Package Include:
1 x Converter
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.