1. Prepare
Clean the lens with water, wipe to dry then tape the surrounding of the headlight to avoid scratches in surrounding area.
2. Sanding
Wet the V elcro sanding disc and attach it to the backer pad. Sands with three different grits to make a completely removal of
the heavy yellowing, fading and corrosion.
(Note: Use the sanding disc from coarse to fine: P400-P800-P1000, otherwise will result in failure)
3. Polishing
Attach the sponge disc to the backer pad, apply the polish paste(step 2) to lens and polish till shining as original condition.
Note: If polish by hand. your're suggested to polish no less than 200 circles clock wise. Will results better is do with a polish machine.
4. Protection
Clean the sponge disc and apply the protect liquid(step 3) that blocks UV rays from damaging the lens.
Thus prolonging the life of restoration.
Note: Before step 3, make sure the lens are fully shined and clean. After step 3, keep the lens dry and don't wash the lens
immediately before its's fully dried.
Package Included:
2 X P400 Sanding Discs 2 X P800 Sanding Discs 1 X Mask Tape
1 X Sponge Disc Orange 2 X 28.3ml Polish Paste 1 X Sponge Disc
1 X Backer Pad M10 Thread 2 X 3ml Protector Liquid 1 X Adapter Bolt Knot
2 X P1000 Sanding Discs