Innovative technology for 3 inch compression drivers, the new high-strength compact motor, allows you to keep a large voice coil without sacrificing performance. With a smaller design and as powerful as ever, this high frequency 2″ exit driver is taking the industry to the next level!

The new D3220Ti design still retains the same diaphragm design as the previous model. This offers the famous PRV Audio crisp high output on high frequency response, with accuracy (from 1200 to 17,000 Hz) with an emphasis on the critical upper frequency range.

• Pure Titanium diaphragm with large 3″ Voice Coil, providing the lowest possible moving mass with excellent efficiency – 108 dB Sensitivity.
• Works great with any Shallow Horn from WGP14-50X Series– Perfect as compression driver for car audio. Mounting hardware is included.
• 2 Inch Exit horn Driver with crystal clear, high impact highs response from 1200 to 17,000 Hz
• PRO Audio high frequency driver, able to handle 300 Watts Continuous Program Power (RMS) with music for extreme output capability.

The D3220Ti ferrite titanium compression horn driver, offers the best performance for the price, features a compact magnet motor.

This allows you to use this horn driver in custom doors and stuntwall systems for vocal reinforcement. We have created a compact and powerful driver that solves the critical component spacing and weight issue in large systems.

The special diameter allows front mounting, making it easy to install, without detaching the driver from any WGP14-50 Horn. The driver diameter measures only 5.71″ having enough clearance to fit inside the 5.75″ baffle cut needed for our 2″ exit horns from the WGP14-50 Series.

The titanium diaphragm is attached to a 3″ diameter copper-clad aluminum wire with Kapton® former for a high 300 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP.

• 1400 Hz at 12 dB per octave filter Crossover / BT12
• 1200 Hz at 18 dB per octave filter Crossover / BT18

The pure titanium diaphragm of this driver provides crisp output focusing on vocals and high-frequency response, making it our most famous high-frequency driver!

GENERAL SPECIFICATIONS

Exit Throat Diameter	2” (50 mm)
Nominal impedance	8 Ohm
Nominal Power Handling*	150 Watts
Continuous Program Power(RMS)**	300 Watts
Max Peak Power***	600 Watts
Sensitivity 2.83V at 1m	108 dB
Recommended Hi Pass Crossover For Full Power Handling	1400 Hz 12db/oct Crossover
Frequency Response at -10dB	1,200 – 17,000 Hz
Voice Coil Diameter	3” (76 mm)
Voice Coil Wire	CCAW
Voice Coil Former Material	Kapton
Diaphragm Material	Titanium
Flux Density	1.77 T
Magnet Material	Ferrite

After several months of research and development in search of a shorter horn that would still amplify low frequencies without any output loss, PRV Audio Group engineers developed the WGP14-50X Horn Series’ patented design (Patent #29/842,663), which features a unique octagonal shape engineered not only for outstanding looks, but to dramatically increase dispersion and output on a compact profile!

Take your custom system to the next level armed with a unique LOOK with the WGP14-50X Horn Series, a waveguide with a 2″ throat exit designed to work with any of our 2" Exit Compression  Drivers.

We reduced 1.16″ off its mounting depth, compared to our rounded WGP14-50 Horn Series, giving the new design only 3.86″ of mounting depth. This increases options for custom systems, allowing you to fit more with less space, which is ideal for both custom door panels and trunk systems.

Its blue chrome paint gives it a distinct finish, making this new series the most unique horn in today’s car audio market!

• Compact Profile allows to mount 2″ drivers with very little depth
• Squared outside edges allow easy side or up stack of multiple drivers in a compact format
• 2″ throat with standard 4-bolt mounting pattern
• Non-resonant reinforced plastic construction
• Wide Coverage with a Limit frequency of 700 Hz

GENERAL SPECIFICATIONS

Throat Diameter	2” (50.8 mm)
Mounting Type	Bolt-on
Hole Dimensions	0.31″ 8 mm
Bolt Circle	4″ 102 mm
Nominal Coverage
Horizontal	60°
Vertical	60°
Flare type	Hybrid
Material	Plastic (ABS)
Finish / Coating	Several Colors
Dimensions
Height	6.16″ (156.5 mm)
Width	6.16″ (156.5 mm)
Depth	4.37″ (111 mm)
Mounting Depth	3.86″ (98 mm)
Baffle Cutout
Diameter Circle	5.75″ (146 mm)
Net weight	0.46 lb (0.21 kg)