This fixed price listing is for 1 x Timer (wind up type) as shown.
Rated at 16 amps this timer is a 2 x changeover type, it has 6 terminals to accept standard push fit spade connectors, made up of 2 blocks of switches with Common, Normally Open and Normally Closed contacts on each of the two sets. This timer also has a permanent (over-ride) position if turned back to 11:00 o'clock position. With the timer positioned as shown in the picture below the timer measures approx 65mm wide (including terminals) x 53mm high (including terminals) x 52mm front to back (including shaft), hole centres for securing to the panel are positioned at 3 o'clock and 9 o'clock and centres are approx 28mm apart, the shaft protrudes 23mm from the front and is 6mm diameter x 4.3mm, the flat of the shaft faces down towards 6 o'clock position when in the off position (timer can be mounted other way up if required). Faucigny Mi2 type.
Connection: Lateral
Mounting Distance: 28mm
Shaft Length: 23mm
Shaft Diameter: 6mm x 4.6mm (D-shape)
Permanent position: yes
Switch Power: 250V 16A
Function: 2CO
Number of Poles: 2
Operation Time: 120min (2 Hour)
Please visit our ebay shop to see our huge range of catering parts.
All of our parts are sent out same day from our own warehouse stock. If you have any questions please do not hesitate to contact us.
We do advise that any parts are diagnosed, installed and tested by a suitably qualified engineer.
Catering Parts UK stock a huge line of spare parts to suit all gas and electrical commercial catering equipment, refrigeration equipment, dishwashers and glass washers.
