16-250mm M42 Bi Metal Lochsäge Cutter Bohrer für Aluminiumrohr Kunststoff Holz
Specifications:
  • Material: M42 Bi Metal
  • Farbe: rot
  • Lochsäge Cutter Durchmesser: 16mm ~ 250mm
(16 mm / 17 mm / 18 mm / 19 mm / 20 mm / 21 mm / 22 mm / 23 mm / 24 mm / 25 mm / 26 mm / 28 mm / 28 mm / 30 mm / 32 mm / 35 mm / 38 mm / 40 mm / 42 mm / 45 mm / 48 mm / 50 mm / 53 mm / 55 mm / 60 mm) / 65mm / 70mm / 75mm / 80mm / 85mm / 90mm / 95mm / 100mm / 105mm / 110mm / 115mm / 120mm / 125mm / 130mm / 135mm / 140mm / 145mm / 145mm / 155mm / 155mm / 160mm / 165mm / 170mm / 170mm / 180mm / 185mm / 190 mm / 195 mm / 200 mm / 210 mm / 220 mm / 230 mm / 240 mm / 250 mm)
  • Schaftdurchmesser: 10 mm
  • Gesamtlänge: 80mm-100mm
  • Trepanning Hole Tiefe: etwa 0-25 mm
  • Größe des Zentrierbohrers: 5 × 57mm, geeignet für Lochsägenschneider von 16-30mm
                                                     6 × 57mm, geeignet für Lochsägenschneider von 32-55mm;
                     
                                                     6 × 77 mm, geeignet für Lochsägen-Fräser ab 60 mm.
 
(Der Zentrierbohrer ist ein Verbrauchsartikel, Sie können ihn bei Bedarf als Ersatzteil erwerben.)
  • Anwendung: holzplatte / gipskartonplatte / kunststoff / 0,5mm dicke blech aluminium / verschiedene holz, etc.  
Eigenschaften:
  • Einsetzbar für 0.5mm Blechlegierung / Metallrohr / Kunststoff / Holz / Gipskarton / etc.  (Can be used for 0.5mm sheet metal alloy / metal pipe / plastic materials / wood / gypsum board / etc.)
  • Beim Öffnen des Lochs sollte Kühlmittel hinzugefügt werden, um eine Verkürzung der Lebensdauer zu vermeiden.  (When opening the hole, the coolant should be added to prevent shortening the life.)
  • Lochsäge Cutter vor dem Gebrauch sicherstellen, dass die Auswahl, die Kontrolle, der Tachometer und die Kühlflüssigkeit kontinuierlich hinzugefügt werden, um das Reißen der Kanten zu verhindern und schließen, um seine Geschwindigkeit zu minimieren, weit verbreitet in Verbindung mit verschiedenen Arten von Bohrungen auf der Bank.  (Hole Saw Cutter before in use, be sure to grasp reasonable, choice, control, tachometer and continuously added to the cooling fluid, in order to prevent edge cracking, such as high-speed gun drill used in the operation should control switch, so opening and closing to minimize its speed, widely used in conjunction with various types of drill hole drilling on the bench.)
  • Öffnen Sie Eisen als 5 mm, öffnen Sie zuerst etwa 1 mm tief, und positionieren Sie dann den Bohrer entlang der Schnittfuge durch ein Loch, das durchbohrt wird.  (Opening iron than 5mm, the first open about 1mm deep, and then locate the drill along kerf through a hole drilled through it easier to discharge iron filings.)
Hinweis:           
Package Include:
  • According to your Choose!
  • Anderes Zubehör ist nicht enthalten.
Payment:
  • Paypal only
Delivery details:
  • We only accept your Ebay Address,Please Make sure it's 100% right.
  • The items you ordered will be shipped out in 2 business day by Air Mail when your payment is clear.
Terms of sales
  • If you are not satisfied with the item, please contact with us.
  • We will offer Full Refund to you when we receive your returned item.
  • Any problem, please feel free to contact with us.
About us:
  • If you are satisfied with the products,I expect you can leave us a positive feedback.
  • If you have any problem or be not satisfied with them,please feel free to contact us,we will reply you within 24 hours.
Contact us:
  • We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response.
  • About item:For the functional products in our shop, we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance. Please be advised before you bid.

 

PushAuction


Am 18.06.19 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques