New Old stock watch bands...they come in 17 and 18mm width, please specify the width you want when you pay, in paypal notes..(If you buy more than 2, need to specify the width you want...can make any combination of 17 and 18 mm that you want...) usable length is currently approx. 6 7/8" - 8 1/8"..the measurements are for the band in its current state, and is not total length.It measured from middle of the buckle to the end of holes,..It can be made shorter or longer two ways...one is to use more or less fabric inside the buckle...one of the photos shows the band from the back..the other is to add more holes...You can make this band as short as you need very easily... To make it longer,  you can make one more hole and use some of the fabric in the buckle...Conservatively, that gets me to about 8 10/16"...However, the watch will bunch up some of the fabric when installed, as well as you will stretch the fabric when you put it on...Not sure how that all works out in terms of the length but my guess is that the maximum wrist size for this band is about 8.5". Band will come as pictured without push pins. Please let me know if you want shorter or longer bands...Also, this buckle is not solid brass because it is magnetic, so must have a brass finish.