BATTERY CABLE PREMIUM GRADE PURE OFC COPPER
CHOICE OF SIZE: 6 AWG, 4 AWG, 2 AWG, 0 AWG (1/0) or 00 AWG (2/0)
CHOICE OF COLOR: RED OR BLACK
CHOICE OF LENGTH: 1 FT up to 50 FT
Your choose your battery cable size gauge, color and length from the options above near the purchase buttons.
ABOUT THIS AWESOME BATTERY CABLE...
This extreme battery cable is specially designed to meet the demands of various environments while staying extremely flexible. Full AWG sized copper conductor made from Oxygen Free Copper (OFC) pure annealed electrolytic copper, so you get maximum power. The insulation and jacket compounds are specially formulated to stay flexible even in cold weather and carry a -49C to 105C temperature rating. The jacket is resistant to chemicals, water, abrasions, oil, sunlight and has a color coded dual extrusion jacket with a white inner insulation which would show any damage to the outer cable more clearly. This cable is rated up to 600 Volts and is suitable for use in automotive applications, solar battery bank wiring, power inverter battery cables, marine battery cables and many other applications calling for a durable yet flexible battery cable. The battery cables meet the requirements of SAE J1127 and J378 making them ABYC and US Coast Guard approved for boat and marine use.
BENEFITS OVER WELDING CABLE:
Full AWG Size Copper Conductor
TPE Jacket is Oil Resistant where EPDM on many welding cables is a poor insulator against oil
SAE Rated for Automotive and Marine Uses
BENEFITS OVER CCA POWER WIRE:
Our cable is Copper...REAL COPPER but watch out for other "CCA Cable" as CCA Means Copper Clad Aluminum so you'd be using Aluminum which is a poor conductor compared to this pure copper cable! You have to use larger sizes of aluminum CCA cable, approximately 2 sizes larger to get close to the same power delivery as real copper cable! If you care about maximum power use our cable!
Other Benefits Include:
- ABYC and USCG Approved for use on boats
- SAE J1127 Approved
- SAE J378 Approved
- TPE Jacket is Very Resistant to Oil, Water, Acid, Gas, Tears and Abrasions
- The Jacket Insulation Meets UL FT1 Flame Resistance Rating
- Annealed Electrolytic ETP OFC Copper with Class K (Type III) Rope Lay for flexibility
- FULL AWG Copper Content
MADE IN THE USA
Suitable Uses:
- Automotive Battery Cables
- Marine / Boat Battery Cables
- Solar Battery Bank Array
- Forklift Charging Cables
- Power Inverter Cables
- Welding Cable Leads
- Amplifier Wiring
- ...and many other uses
Here are the dimensions of our Battery / Welding Cables:
Gauge Stranding Outside Diameter Weight per foot LBS
6 266 .39 in .138
4 420 .44 in .185
2 655 .51 in .271
1/0 1064 .61 in .426
2/0 1330 .66 in .530
For use as battery cables:
SAE J-378 Table of Allowable Amperage for conductors 50V or less with 105C rating
Gauge Amps Outside of Engine Space Amps Inside of Engine Space
6 120 102
4 160 136
2 210 178
1/0 285 242
2/0 330 280
For use as welding cables:
| WELDING CABLE AMPACITY BASED ON DISTANCE - SIZING TABLE | |
| AMPS | 100' | 150' | 200' | 250' | 300' | 350' | 400' | |
| 100 | 4 | 4 | 2 | 2 | 1 | 1/0 | 1/0 | |
| 150 | 4 | 2 | 1 | 1/0 | 2/0 | 3/0 | 3/0 | |
| 200 | 2 | 1 | 1/0 | 2/0 | 3/0 | 4/0 | 4/0 | |
| 250 | 1 | 1/0 | 2/0 | 3/0 | 4/0 | | | |
| 300 | 1/0 | 2/0 | 3/0 | 4/0 | | | | |
| 350 | 1/0 | 3/0 | 4/0 | | | | | |
| 400 | 2/0 | 3/0 | | | | | | |
| 450 | 2/0 | 4/0 | | | | | | |
| 500 | 3/0 | 4/0 | | | | | | |
| 550 | 3/0 | 4/0 | | | | | | |
| 600 | 4/0 | Required Cable Sizes Show in Gauge Numbers | |
*The total circuit length includes both welding and grounds leads (based on 4-volt drop) 60% duty cycle. | | | | | | | | |
| | | | | | | | |
These values for current-carrying capacity are based on a copper temperature of 60°C (140°F), an ambient temperature of 40°C (104°F) and yield load factors from approximately 32% for the 2 AWG cable to approximately 23% for the 3/0 AWG cable. In actual service, the load factor may be much higher than indicated without overheating the cable as the ambient temperature will generally be substantially lower than -40°C. |
|
|
|
Now, a little education on why our REAL COPPER cable is better than CCA (copper clad aluminum):
It's important to understand that our cables are REAL COPPER and they will handle more current (amps) than CCA (copper clad aluminum) cable in the same size. Many products on the market use CCA instead of real copper and most people just don't know the difference so here you go:
- Our copper cable is rated to 100% conductivity vs 61% for Copper Clad Aluminum (CCA) meaning you need 2 sizes larger for a CCA cable than you would if you used real copper.
- Copper is flexible and doesn't break easily but Copper Clad Aluminum (CCA) expands and contracts nearly 1/3 more than copper from heat. Add to that the fact that aluminum has around 37% of the tensile strength of copper and you have the potential for breaking strands and loosening connections...something you shouldn't mess with in high amperage DC Voltage applications!
- Copper Clad Aluminum was designed for AC voltage use especially in high frequencies like those found in signalling and telecommunications as AC current travels on the outside of the conductor so aluminum inside and copper outside meant an overall lighter weight and lower cost wire...but there is not a single benefit in DC voltage! It's a sad abuse by manufacturers to sell low quality cable dressed up as copper to unsuspecting buyers.
So now you know why our REAL COPPER cables are superior! Share this info with family and friends and BE SAFE!
Use REAL COPPER...like the soft annealed copper which makes up our durable and flexible multi-rated battery and welding cable.