Gearbox

INPUT: 1-3/8" SMOOTH 
OUTPUT: 1 1/2" 12 SPLINE 
RATIO: 1:1:47 
MOUNTING PATTERN (4) 5/8" HOLES - 6 3/4" PATTERN 5" CENTER
ROUND STYLE GEARBOX
40HP


SKU: 87854


BRAND NEW

GREAT QUALITY FROM THE DISTRIBUTOR THAT SUPPLIES TO ALMOST EVERY IMPLEMENT MANUFACTURER

This is a universal box that will fit every brand 
Gearboxes are not brand nor model specific
Check all specifications and ask for more if you feel like you need prior to ordering

****The gearbox is shipped without oil for shipping purposes*** 
 It takes 80-90 gear oil.  
A plug on the top and a small little pipe plug on the bottom right side.  
The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full.  
You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. 
Of course you do this with the box mounted on the cutter and in an upright position. 
Prior to each use always check the oil lever--an empty gearbox will fail





Before finalizing your purchase please review eBay’s return policy. In addition, returns will not be accepted, unless the product is returned within 30 days and is in its original condition unopened, unused, undamaged packaging and tag must still be attached.  Buyer is responsible for return shipping.  Any damage claims must be accompanied by photographs and/or the damaged product being returned to seller.  In some cases, a signed affidavit detailing the circumstance may be required.

*We strive for 100% satisfaction. If you are not satisfied with your product, please send us a message prior to opening a return or case*