Ultra Sparks Our own-brand premium cable used in the majority of our high performance lead sets.

The core consists of a fibreglass base coated with a ferromagnetic compound and tightly wound with a stainless steel resistance

wire under a coat of conductive lacquer.

The design ensures maximum spark quality with minimum voltage loss while maintaining excellent Electro Magnetic Pulse suppression.

Overall Diameter: 8mm

Covering:

Resistance:               5.6kOhms per metre (nom) as standard

Reinforcement:         Glass fibre braid over insulation

Test Voltage:             8.0mm dia Silicone - 35.0 - 40.0 kV RMS BDV (typically)

Specification:            Fully approved to ISO3808:2002(R) Class E Type 4

Termination:             All lead sets use brass, beryllium copper or stainless terminals with silicone or EPDM connector covers,

many of which are sourced from the Original Equipment manufacturers.

Our lead sets are designed to equal or exceed the design of the original lead set without compromising on fit or function.

Insertion Loss Measurements for Ultra Spark cable measured over 1m

Cable Length [mm] 465mm
Cable Length [mm] 515mm
Cable Length [mm] 565mm
Cable Length [mm] 625mm
Quantity
Ignition Cable Connector Type SAE
Ignition Cable Resistive Ignition Cable
Ignition Coil Connector Type DIN
Distributor/ Rotor Connector Type DIN
Length 1 [mm] 455mm
for cable diameter [mm] 8mm