eBay

Product Knowledge

Excellent Service

Fast Shipping

5-30V Micro USB Power Adjustable Delay Relay Timer Control Trigger Switch

Working voltage: Wide-voltage 5--30V, two power supply terminal or the interface MicroUSB KF301

Operating mode: power supply, the output of the module status: normally open (NO) and the common terminal (COM) open, normally closed (NC) and the common terminal (COM) is turned on.

Originating outside the contact (TRIG) to a low pulse signal, or touch button to trigger instant, and relay, work lights, and the status of the relay output: normally open (NO) and the common terminal (COM) is turned on, normally closed (NC) and the common terminal (COM) is disconnected after 0-24 seconds (this time can be adjusted according to your needs) relay is switched off after the bell, then relay back to the state before the trigger.

3The time can be adjusted by potentiometer, default 0-24 seconds. If you need more time, may be replaced by the larger capacitor (C2) or potentiometer. Delay time formula: T = 1.1RC. For example: Capacitor 22uf resistance 1M T = 1.1 * 0.000022 * 1000000 = 24.2 seconds.

Relay indicator.

Control: 10A 250VAC (AC), 10A 30VDC (DC) or less load.

Freewheeling protection relay.

Signal terminal block has a pull-up and design of the filter circuit, anti-jamming capability, suitable for industrial control. Many manufacturers have added optocoupler isolation, but with the trigger signal to the module and not isolation, would not achieve the interference effect. After the test was found to improve the stability of the trigger end to interference, whether in this module under electromagnetic interference environment, or through instant power module, the relay will not malfunction.

Size: 54 x 19 x 18mm

Weight: 16g

Please note: Sometimes this product comes from different suppliers and may not be exact to what is pictured here, however all the parameters, values and connections are the same.

Payment

Postage

Please pay as soon as possible, as that will allow us to post your item to you sooner!

Express Post is available for an additional $14.95 however it's recommended to take advantage of the free express post offer.

We offer FREE postage on this product!

Your order will be sent same day or within 1 working day of receiving payment (Monday-Friday) and you should expect to receive approx 5 days after dispatch.

In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

All prices include GST and every purchase comes with a tax invoice!

FREE Express Post for Orders over $100

We've all experienced the long waits for our parcels lately with Australia Post's increased workload and restrictions. If your order is $100 or more then we'll just give you express post automatically for no extra cost.

Returns

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.

You can return a product for up to 30 days from the date you purchased it.

Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Based in Melbourne

Awesome Feedback

Value for Money

5V-30V Micro USB Power Adjustable Delay Relay Timer Control Module Trigger Delay Switch Working voltage: Wide-voltage 5--30V, two power supply terminal or the interface MicroUSB KF301 Operating mode: power supply, the output of the module status: normally open (NO) and the common terminal (COM) open, normally closed (NC) and the common terminal (COM) is turned on. Originating outside the contact (TRIG) to a low pulse signal, or touch button to trigger instant, and relay, work lights, and the status of the relay output: normally open (NO) and the common terminal (COM) is turned on, normally closed (NC) and the common terminal (COM) is disconnected after 0-24 seconds (this time can be adjusted according to your needs) relay is switched off after the bell, then relay back to the state before the trigger. 3The time can be adjusted by potentiometer, default 0-24 seconds. If you need more time, may be replaced by the larger capacitor (C2) or potentiometer. Delay time formula: T = 1.1RC. For example: Capacitor 22uf resistance 1M T = 1.1 * 0.000022 * 1000000 = 24.2 seconds. Relay indicator. Control: 10A 250VAC (AC), 10A 30VDC (DC) or less load. Freewheeling protection relay. Signal terminal block has a pull-up and design of the filter circuit, anti-jamming capability, suitable for industrial control. Many manufacturers have added optocoupler isolation, but with the trigger signal to the module and not isolation, would not achieve the interference effect. After the test was found to improve the stability of the trigger end to interference, whether in this module under electromagnetic interference environment, or through instant power module, the relay will not malfunction. Size: 54 x 19 x 18mm Weight: 16g All prices include GST and every purchase comes with a tax invoice