Specifications:
Tang; Full tang
HRC ;58 (real combat ready)
Sharpness ; can easily cut Bamboo/trees/A4 paper.very sharp!
Hamon;with real hamon
Overall Length: 103cm/40.55 inches
Nagasa Length: 70 cm/27.56 inches
Handle Length: 26cm/10.24 inches
Kissaki Shape: CHU-KISSAKI
Blade Sharp: SHINOGI-ZUKURI
Blade Material: T10 with Clay tempered
Tsuba Material: High quality Alloy Tsuba
kashira,fuchi/menuki material :Alloy
Blade Width (near Habaki): 1.26 inch / 3.20cm
Blade Width (near Kissaki): 0.91inch / 2.30cm
Weight (with Saya ): 2.73 lbs / 1.24 kg (approximately)
Weight (without Saya): 2.26 lbs / 1.02 kg (approximately)
Saya Material: hard wood+synthetic leather +shoulder belt
Handle Material: handle material+ genuine ray skin+synthetic leather
Condition: Brand New
Blade;
1.The Blade Of The Sword Has Been Hand Forged Using The Ancient Method Of Sword Making . Full Hand Forged And Full Hand Polished.
2.The Blade Was Made Of T-10 High Carbon Steel, And It Has Been Laminated In A Maru Configuration(Single Type Mono Steel). Differential Hardened And Clay Tempered, Water Quenched And Polished.
3.The T-10 High Carbon Steel (The Steel Has A 0.1% Carbon Content And 0.4% Manganese.）Is Very Solid And Holds An Edge Well. This Blade Was Then Clay Tempered And Has More Than 14 Process Hand Sharpening Work. Which Made The Surface Of The Blade Like A Mirror.
4.This Blade Has Been Tried And Tested To Cut Everything That Gets In Its Way. The Sori (Blade Curvature) Is Specially Crafted To Create Leverage In Order To Perform The Smoothest And Cleanest Cuts. That In Combination With The Choice Of Traditional And Our Top Selling Koshirae (Fittings), Assures That You Will Get The Best Of Both Appearance And Functionality.
5.The Japanese Top Choji Hamon Pattern Is Done In The Same Process As The Traditional Method. Harden The Edge Is By Using The Special Clay Wrapping The Blade Then Put In Water To Quench. It Requires A Lot Of Skills. The Fire Temperature Can Not Be Too High Or Too Low It Needs To Be Well Controlled By The Sword Smith. The Blade Is Then Put Into Water For Quenching. The Blade Shape Is Done This Process Creates Beautiful Hamon Hada And Martensite (Grains) On The Blade Surface. Clay To Protect The Edge And Quenched In Water To Temper The Mune Or Spine Of The Sword. The Hardness Of The Carbon Steel Measures At An Impressive HRC On The Rockwell Scale. The Perfect Combination Of The Hardness Of The Edge Steel, And The Increased Sori (Curvature Of The Blade), Enables This High Quality Blade To Easily Cut Through Tatami Straw Mats Or Bamboo For Tameshigiri.
6.This Blade Comes With A Full Length Tang Which Greatly Enhances The Strength Of The Sword. The Back Of The Blade Is A Shaped Shinogi Zukuri, and with Diamond-Shaped standard-Point (Chu-Kissaki), it was well defined with the hamon going all the way through the Boshi.
Tsuba;
This tsuba (guard) of the sword is made of alloy with two Seppas (spacer securing it..The Habaki (blade collar) is of brass composition
Saya;
This saya is hard wooden wrapped synthetic leather bag , the real leather Sage-O is tied around the saya,the saya with shoulder belt,the Koiguchi(scabbard mouth) and Kojiri(scabbard tip)has been hardened.
Tsuka;
This Tsuka is wooden one wrapped with genuine ray skin, and tied with real leather ITO in the traditional wrap.The Fuchi (sleeve) and Kashira (buttcap) on the tsuka are made of alloywith matching Menuki on each side as an ornament, two Mekugi (peg) are nailed to secure the Tang of the sword. (Sword can be disassembled by picking up the two Mekugi (peg)
NOTE:
(1) A sword bag comes with the sword. but the wooden stand in below item pictures is NOT included.
(2) if you need one wooden stand, please contact me,
(3) This Katana can be taken apart fully anytime for maintenance purposes, you can disassemble the sword from the handle by taking out two pegs.
(4) Due to our swords are full hand made, so Specs will vary slightly from sword to sword. please understand.
Offer customize and you can design your sword.
All our sword can change Tsuba(handguard), Sageo/ito, Saya and other sword accessories. we also can customize the blades unsharpened if you don't want very sharp blade , in addition, in order to make your sword more unique, we can engrave your name, simple symbol or something else you like on the blade. one word, we can customize blade shape/blade material /blade sharpness/Length（shorten or longer blade/sword handle) and any you like.Welcome to you contact us by eBay message
Buyer request Special customize product, NOT quality problem,we will not accept return and exchange.
We have been trying to provide a most reasonable price and high quality products. Welcome to order!