![](https://www.mzfort.com/mittoy/images/mi_spc.jpg)
- Condition: 100% new
- Color: Black
- Material: Plastic & Metal
- Size: approx. 15.5x1.8cm (6.1x0.7inch) (L x D)
- Tip Spacer: approx. 0.2cm (0.08inch)
- Powered by: one 1.5V AAA battery
- Item included: 1 x Brake Fluid Tester (no battery)
- Compatible With: fit for all car
This Is Aftermarket Replacement Item But Not Genuine
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
![](https://www.mzfort.com/mittoy/images/mi_des.jpg)
Feature:
The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality is tested and included on five LEDs in terms of "per cent of water in the brake fluid".
1) To check the quality of brake fluid quality.
2) 5 LED to indicate percentage of water in the brake fluid.
3) Easy operation.
4) Automatically power off.
5) Operated by a LR03 AAA 1.5V battery.
6) Suitable for testing DOT 3, DOT4, DOT5 brake fluid.
Usage:
Unscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device.
Press the button for power on, green LED will light up. Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs. Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity.
Product labelling Indication:
Green: Battery OK, no water contained in brake fluid.
Yellow: Less than 1% of water content in brake oil, better condition, ease of use.
Yellow /yellow: approx. 2% of water content in brake oil, brake fluid can continue to use.
Yellow /yellow/red: approx. 3% of water content in brake oil, the proposed replacement of brake fluid.
Yellow /yellow/red/red: at least 4% of water content in brake oil, the brake fluid must be replaced urgently! Extreme danger!
Attention:
1) Replace battery if the green LED not light p any longer after you press power on button. Wash the test probe with tab water after use.
2) In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water.
3) Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic.
![](https://www.mzfort.com/mittoy/images/mi_car_hmain.jpg)
![](https://www.mzfort.com/mittoy/images/mi_pic.jpg)