All vehicles use several different types & sizes of clips,,That fit several different places on your vehicle ,,  Just because it says compatible with your vehicle does not mean it fits every place on your vehicle,, Look at photos and size listed in description to make sure you're buying correct clip THESE MAY FIT THE DOORS , LIFT GATE OR TAILGATE,, SO PLEASE COMPARE THESE CLIPS TO YOUR OLD CLIPS , ALL VEHICLES USE SEVERAL DIFFERENT TYPES OF RETAINING CLIPS , IF UNSURE PLEASE CONTACT ME WITH YOUR YEAR, MAKE, MODEL AND LOCATION YOU ARE USING CLIP.

2 pair tailgate / door clips.. fits most dodge , chevy , gmc trucks plus many many Mopar & General Motors cars


TAILGATE/DOOR  LATCH CLIPS   

1-PAIR FITS 3/16" Rods 

1-PAIR FITS 5/32" Rods 


Tailgate Handle Universal Repair Clips  (2 clips) 

Tailgate rod clip, nylon 

 (The 3/16" are after-market Universal Clips , They have a Left angle and will work on the top or bottom side of the rod  and work on the left or right side of the handle.

This Clips fit's 2002 TO 2005 Dodge Ram Tailgate latch with the 3/16" Tailgate Rods that have a 90 degree bend at the end of the rod.plus general motors tailgates from 1981 to 1998

Plus the 5/32" clips fit GM TAILGATES FROM 1999 TO 2010

BEWARE THAT DODGE , CHEVY AND GMC USES DIFERENT SIZE CLIPS ,, A 5/32" CLIP TO FIT THE 5/32" ROD AND A 3/16" CLIP TO FIT THE 3/16" ROD,, 



If unsure please contact us before you buy


This clip also fits several General motors trucks including but not limited to

1981 to 1998 UP TO 2010  GMC & CHEVY Tailgate Rod Clip's ( 1-Pair )

 

Specification Material: Nylon

Color: Natural

             
Application GM Trucks C, K 1, 2, 3 1981-On   and some Dodge trucks  

( YOU GET 2 CLIPS )Tailgate rod clip, nylon,

Tailgate Rod Clip  3/16" Rod Size

Natural Nylon
Fits Rod Size:               3/16"

Fits Hole Size:              9/32"

Fits Bracket Thickness: Up to 5/32" 

 

 

 

Posted with eBay Mobile



ALL ITEMS ARE SHIPPED IN BUBBLE PADDED ENVELOPES MAILERS 5" x  8"  , IF YOU PREFER ITEM BE SHIPPED IN BOX PLEASE CHOOSE PRIORITY MAIL AT ADDITIONAL COST.

There's no way that we can list where every clip goes on a vehicle ,, they're just to many different styles , sizes and locations. 


PLEASE LOOK AT PHOTO'S , PART #'S & SIZE OF ITEM LISTED,,, YOU WILL RECEIVE EXACTLY WHAT IS PICTURED

THESE WILL NOT WORK ON TRUCKS THAT HAD THE STEEL CLIPS HOLDING ROD TO LATCH

WE WILL SHIP INTERNATIONAL BUT BUYER WILL PAY ACTUAL SHIPPING COST .

ATTN: ALL BUYERS : PLEASE MAKE SURE YOUR SHIPPING ADDRESS IS CORRECT BEFORE MAKING A PURCHASE, WE CAN ONLY SHIP TO THE ADDRESS ON FILE WITH EBAY, NO EXCEPTIONS 

Check out my other items!


DOUBLE CHECK THE ROD SIZE AND THE HOLE SIZE TO MAKE SURE THESE WILL WORK AS A REPLACEMENT
I guarantee to ship your item within one (1) business days after payment is received.
Please read the complete listing before making a purchase and please ask questions and I will help all I can.
If you are not satisfied with your purchase for any reason, let me know and I'll make it right.
Refunds or exchanges will be made for any item returned within 30 days.
Returned item must be in same condition as when delivered.
My goal is a 5-Star rating on every transaction.
If you are not satisfied with your purchase in any way, please give me an opportunity to make it right before leaving feedback.
A simple email can solve any problem that might occur with any transaction you have with me.
This is more of a hobby to me than anything else, I'm disabled and this gives me something to do with my day.
 I enjoy helping people out and if I don't have what your looking for I'll do all I can to help you find it reguardless if I make a sale or not.



I know its hard to measure the rod and hole size with the handle attached to the vehicle but I found a fairly easy way to get the measurements , Use an Open end wrench to check the rod size and use a Drill Bit to check the Hole Size, This is the easiest way to get the measurements with the Door/Tailgate handle attached to vehicle and there is a 1/32” plus or minus tolerance on both the rod and the hole.
So if the auction says fits a 5/32” Rod & fits in a 15/64” hole then you would use a 5/32” open end wrench & a 15/64” drill bit,,, It's that easy.
Some clips I can tell you for sure they will fit your vehicle but others I cannot because there is several different size clips on some vehicles.
ALL my auctions have the Rod and the Hole measurements in the Auction description, .So you can use the wrench and drill bit method to measure your Rod & Hole and if the measurements on your door/Tailgate match the measurements in the auction, Then you have found the correct replacement clip for your vehicle.
, I have most size clips in stock at all times, I do not drop ship or back order any of my clips, If I have an auction for the clip, IT'S IN STOCK and it will ship within 1 day of me receiving cleared payment. Monday thru Saturday. I visit the Post Office once a day at about 9 am.
Feel free to ask any questions you may have, We'll help all we can.
                        http://stores.ebay.com/tailgate-N-doorclips

                                             Rick  , ( AKA  Pop's )

A little info about international shipping, we set a price for international shipping that might seem a little high and there's a good possibility that it is, But when I go to print the label I show the price on the package and if you were charge more than the price on package I will refund you the difference of what you paid and what the actually shipping cost was as soon as label is printed .
We charge Actually shipping cost for international shipping and not a penny more.

Thanks for understanding

Rick

Feedback is extremely important to us and eBay If you are satisfied with our transaction, please take a moment to leave Positive Feedback. YOUR Satisfaction is our #1 Priority! If there are any issues, PLEASE contact us BEFORE leaving a neutral or negative rating or opening a dispute so that we may resolve any problems or concerns you might have. We PROMISE we can make you happy if you give us a fair chance. Thanks Rick ( AKA Pops )
These may be a different color than shown, they come in several different colors, depending on what we have in stock , They are the same size and color is the only difference
 ATTN: ALL BUYERS : PLEASE MAKE SURE YOUR SHIPPING ADDRESS IS CORRECT BEFORE MAKING A PURCHASE, WE CAN ONLY SHIP TO THE ADDRESS ON FILE WITH EBAY, AND ADDRESS CANNOT BE CHANGED AFTER LABEL IS PRINTED AND ITEM IS SHIPPED,, NO EXCEPTIONS ,, Sorry