AD8232 Single Lead Double Poles Pulse Heart Rate Monitor ECG Sensor Arduino Kit

Popular

    Product Introduction

    Description :
    AD8232 ECG Sensor Module

    Brand New & High Quality
    Analog Output
    Leads-Off Detection
    Shutdown Pin
    LED Indicator
    Specifications:
    Operating Voltage: 3.3V
    3.5mm Jack for Biomedical Pad Connection
    Package Included:
    1PC*Single Lead AD8232 Heart Rate Monitor ECG Developemt Kit

    AD8232 ECG Sensor Module Kit

    AD8232 Adopts an operational amplifier that is without using constraint to build a three pole low pass filter, eliminating extra noises
    Rated Temp Range : 0--------70degree
    Working Temp Range: -40-----85degree
    Specifications:
    1. The AD8232 Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart.
    2. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading.
    3. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a clear signal from the PR and QT Intervals easily.
    4. The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement
    5. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement.
    6. The AD8232 Heart Rate Monitor breaks out nine connections from the IC that you can solder pins, wires, or other connectors to.
    7. SDN, LO+, LO-, OUTPUT, 3.3V, GND provide essential pins for operating this monitor with an Arduino or other development board.
    8. Also provided on this board are RA (Right Arm), LA (Left Arm), and RL (Right Leg) pins to attach and use your own custom sensors.
    9. Additionally, there is an LED indicator light that will pulsate to the rhythm of a heart beat.
    10. Biomedical Sensor Pads and Sensor Cable are required to use the heart monitor and can be found in the Recommended Products section below.
    Application:
    Fitness and Sports Heart Rate Monitoring
    Portable ECG
    Remote Health Monitor
    Game Peripheral Equipment
    Bioelectricity Signal Collection
    Package Included:
    1Set*AD8232 Monitor Kit
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    AD8232 Single Lead Double Poles Pulse Heart Rate Monitor ECG Sensor Arduino Kit

    Product Introduction

    Description :
    AD8232 ECG Sensor Module

    Brand New & High Quality
    Analog Output
    Leads-Off Detection
    Shutdown Pin
    LED Indicator
    Specifications:
    Operating Voltage: 3.3V
    3.5mm Jack for Biomedical Pad Connection
    Package Included:
    1PC*Single Lead AD8232 Heart Rate Monitor ECG Developemt Kit

    AD8232 ECG Sensor Module Kit

    AD8232 Adopts an operational amplifier that is without using constraint to build a three pole low pass filter, eliminating extra noises
    Rated Temp Range : 0--------70degree
    Working Temp Range: -40-----85degree
    Specifications:
    1. The AD8232 Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart.
    2. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading.
    3. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a clear signal from the PR and QT Intervals easily.
    4. The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement
    5. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement.
    6. The AD8232 Heart Rate Monitor breaks out nine connections from the IC that you can solder pins, wires, or other connectors to.
    7. SDN, LO+, LO-, OUTPUT, 3.3V, GND provide essential pins for operating this monitor with an Arduino or other development board.
    8. Also provided on this board are RA (Right Arm), LA (Left Arm), and RL (Right Leg) pins to attach and use your own custom sensors.
    9. Additionally, there is an LED indicator light that will pulsate to the rhythm of a heart beat.
    10. Biomedical Sensor Pads and Sensor Cable are required to use the heart monitor and can be found in the Recommended Products section below.
    Application:
    Fitness and Sports Heart Rate Monitoring
    Portable ECG
    Remote Health Monitor
    Game Peripheral Equipment
    Bioelectricity Signal Collection
    Package Included:
    1Set*AD8232 Monitor Kit
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques