Click images to enlarge
Description
EGR MODULE FOR Mitsubishi Triton and Pajero Sport 2016+
2016-2021 Mitsubishi Pajero Sport 4N15 Engines (2.4L Diesel Euro5)
About Our Mods:
This Australian designed module is made to work with your vehicle to safe guard it from soot build up in your intake manifold.
This product does not affect your coolant operation, it will however reduce your EGT’s. Which is often desired when a vehicle is working harder than standard or in higher environmental demands - such as extreme heat or over towing. Most users noted over 50 degrees Celsius in EGT’s while vehicles were driving normally.
What are the benefits?
Your vehicle’s engine will reduce clogging up of the intake from the recirc system significantly! Which means a longer lasting EVEN cleaner upper manifold, cooler operation, less over all maintenance, and usually lower fuel consumption. As well as less engine noise and less lag from lower RPM.
Less Time In The Shop & MORE ON THE ROAD
Is a plate or catch can required to use this product?
No.
Legalities:
Use at your own risk
Will this EGR Module fix my existing error code?
If you have any electronic faults above that cannot be solved with this module,
send us a message and we can help you diagnose or fix this fault with other means.
Installation
- 1x Original Crispmods EGR MODULE
- Increase performance gains, which includes better fuel consumption, smoother boost and power delivery.
- Less lag.
- Quieter running engine.
- Cleaner fresh engine air intake run.
- No limp mode or fault codes.
- Easy 1-2-3 Quick Installation - No tools required.
- This is the only module of it's kind to be ROHS compliant and IP65 tested!
Start Spending Less Time In The Shop & MORE ON THE ROAD.
Add us to your favourites for more items updated weekly!
What vehicles does this mod suit?
2016-2021 Mitsubishi Triton 4N15 Engines (2.4L Diesel Euro5)2016-2021 Mitsubishi Pajero Sport 4N15 Engines (2.4L Diesel Euro5)
About Our Mods:
This Australian designed module is made to work with your vehicle to safe guard it from soot build up in your intake manifold.
This product does not affect your coolant operation, it will however reduce your EGT’s. Which is often desired when a vehicle is working harder than standard or in higher environmental demands - such as extreme heat or over towing. Most users noted over 50 degrees Celsius in EGT’s while vehicles were driving normally.
What are the benefits?
Your vehicle’s engine will reduce clogging up of the intake from the recirc system significantly! Which means a longer lasting EVEN cleaner upper manifold, cooler operation, less over all maintenance, and usually lower fuel consumption. As well as less engine noise and less lag from lower RPM.
Less Time In The Shop & MORE ON THE ROAD
Is a plate or catch can required to use this product?
No.
Legalities:
Use at your own risk
Will this EGR Module fix my existing error code?
Fault Code | Reason | Cause | Will this product solve this error code? | |
P0401 | EGR Flow Insufficient Detected | This code will come up with a blanking plate or the EGR is stuck closed. | Yes | |
Mechanical fault. | ||||
P0402 | EGR Flow Excessive Detected | The EGR valve is stuck open or is jamming (due to carbon build up or possibly a bent shaft). | Yes | |
Mechanical fault. | ||||
P0403 | EGR Circuit Malfunction | Electronic fault | No | |
P0404 | Exhaust Gas Recirculation Circuit Range/Performance | Electronic fault | No | |
P0405 | EGR Sensor A Circuit Low | Electronic fault | No | |
P0406 | EGR Sensor A Circuit High | Electronic fault | No | |
P0407 | EGR Sensor B Circuit Low | Electronic fault | No | |
P0408 | EGR Sensor B Circuit High | Electronic fault | No | |
P1404 | IAT - B Circuit Malfunction/ EGR Closed Position Performance | Electronic fault | No | |
If you have any electronic faults above that cannot be solved with this module,
send us a message and we can help you diagnose or fix this fault with other means.
Installation
- No tools required.
- Installation Difficulty: Easy as 1-2-3.
- Installation Time: Approximately 1 minute.
- If vehicle wiring is dirty - please clean before install!
Installation Instructions
– Ensure vehicle is OFF with the KEY OUT -
1) Locate the intake airbox on the vehicle.
– Ensure vehicle is OFF with the KEY OUT -
1) Locate the intake airbox on the vehicle.
2) Unplug the MAF sensor from the loom on the airbox.
3) Fit the module onto the female plug of the airbox and onto the male side of the loom (Completing the circuit).
You may now run the vehicle.
*Also Note - In some circumstances, you may notice that warming up your engine may take longer. This is considered quite normal and won't at all affect your driving capacity.
3) Fit the module onto the female plug of the airbox and onto the male side of the loom (Completing the circuit).
You may now run the vehicle.
*Also Note - In some circumstances, you may notice that warming up your engine may take longer. This is considered quite normal and won't at all affect your driving capacity.
How new will the item be?
All are new from the manufacturer
Where are you located?
We are proudly in Melbourne, Australia
How will you prepare my package?
We take great responsibility in ensuring that your items arrive undamaged and discreetly by wrapping them safely in bubble wrap (where applicable). However if you do need special shipping care or a faster shipping option please let us know in the notes upon purchase.
Where do you ship to?
We ship international and try to give you the best available rates and shipping options regardless of your location, how much or how little you spend!