• Performance gains (including better fuel consumption, smoother boost/power delivery).
• Less lag.
• Quieter running engine.
• Cleaner fresh engine air intake run.
• No limp mode or fault codes.
• Quick installation
• The only module of this type to be ROHS compliant and IP65 Tested!
  
  

Brief description:
This Australian designed module is to work with your vehicle to safe guard it from over flowing burnt gases in the intake.
 
This product does not affect your coolant operation, it will however reduce your EGT’s (Which is usually desired when a vehicle is working harder than standard or in higher environmental demands). Most users noted over 50 degrees Celsius drop in EGT’s while vehicles were driving normally.
 
 
What are the benefits?


Your vehicle’s engine will now reduce significantly any clogging up of the intake from the EGR system. This means a longer lasting upper manifold, cooler operation, less maintenance, usually lower fuel consumption, less engine noise and less lag from lower RPM.
 
You may note that warming up of the engine may take longer in some circumstances.

Our modules also do not interfere with the DPF system, when additional heat is required for DPF maintenance, the cable allows stock operation of the components to avoid costly dpf repairs.

Is a plate or catch can required to use this product?

No. You will find this item will outweigh the benefits of ANY catch can on the market (In testing no catch can is 100% efficient.) for the purpose of EGR build up reduction. It only takes a small amount of blow by oil for a catch can to miss to make EGR paste get stuck inside your intake manifold. Hence why an EGR cable is superior. There are other benefits to catch cans in some vehicles.
A plate will not be needed, but if you suspect your valve maybe getting stuck at anything but the closed position, you may want to fit one. It is usually not necessary.
Legalities:
 
Purchase and use is at your own risk.
What vehicles does this suit? 

• 2016 - 2021 Shogun with DPF - 4M41 3.2L engine
• 2017 - 2021 Pajero - 3.2L engine with DPF (Does not suit pre-dpf model!)

 

---

---

Will this EGR cable fix my existing error code?

    

Fault Code	Reason	Cause	Will this product solve this error code?
P0401	EGR Flow Insufficient Detected	This code will come up with a blanking plate or the EGR is stuck closed.	Yes
		Mechanical fault.
P0402	EGR Flow Excessive Detected	The EGR valve is stuck open or is jamming (due to carbon build up or possibly a bent shaft).	Yes
		Mechanical fault.
P0403	EGR Circuit Malfunction	Electronic fault	No
P0404	Exhaust Gas Recirculation Circuit Range/Performance	Electronic fault	No
P0405	EGR Sensor A Circuit Low	Electronic fault	No
P0406	EGR Sensor A Circuit High	Electronic fault	No
P0407	EGR Sensor B Circuit Low	Electronic fault	No
P0408	EGR Sensor B Circuit High	Electronic fault	No
P1404	IAT - B Circuit Malfunction/ EGR Closed Position Performance	Electronic fault	No

 
If you have any electronic faults above that cannot be solved with this module, please send us a message and we can help you diagnose or fix this fault with other means.  
Installation  


How new will the item be?
All are new from the manufacturer

Where are you located?

We are proudly in Melbourne, Australia

How will you prepare my package?
We take great responsibility in ensuring that your items arrive undamaged and discreetly by wrapping them safely in bubble wrap (where applicable). However if you do need special shipping care or a faster shipping option please let us know in the notes upon purchase. 

Where do you ship to?
We ship international and try to give you the best available rates and shipping options regardless of your location, how much or how little you spend!