TOP and Bottom Combo  Mount any type of GoPro style auxiliary camera (or accessory) like a 360 Fusion or MAX on TOP of your Yuneec Typhoon 480 or 520 series . This is the same type of mount we make for DJI Inspire, Parrot Disco allowing complete flexibility. Mount also accepts EVO SS gimbal as pictured if you need maximum stability   Both mounts are included in price at a 20% discount over individual mounts .

Update 6/5/22: We include two 10" Bungee cords if you want to run without clamps and screws (make sure you leave one clamp on for safety) .You can use the included screw on clamps if you want to leave rotors extended. We also extended the mounting area to 3.4" from 3".

If you have the original version and would like the update let us know it will be 10.00 shipped.

Weights:
Top Mounts I1 or I2 50-56g
Bottom Mounts I1 or i2 15-20g
Typical mounting with fasteners for 1 device 6-10g

SAMPLE VIDEO 
https://youtu.be/dPCtQrPHmzs

This is for top mounting on a Yuneec Typhoon H Series 

1-Includes adaptor to accept any GoPro style mounting buckle 

2- Includes front drop down GoPro adaptor for lighting or other accessory (see photos)

3- Includes GoPro Shorty Grip adaptor (see photos)


DRONE NOT INCLUDED


Mount is cross bolted into frame and requires no modification all stainless steel attachment hardware included. Manufactured out of high grade PLA

This mount is not a replacement for the standard Yuneec Typhoon H front mount camera however you could use as your only camera if you do not have a front camera.


COPYRIGHT © 2020 alienconcepts incorporated

Multiple units are available 

MADE IN THE USA

General for All Mounts

We are constantly updating based on field use reports . As a result photos and instructions and components may change
at any time.

Disclaimer

We offer no guarantees  that a mount will perform up to your expectations since there are too many variables.
Use best practices for safe flying at all times . If unsure check with the FAA drone rules and regulations online.
We assume no responsibility for any damage or injury because of the addition of one of our mounts.

Payload Location and Clearance

When mounting payloads verify against recommended weights and sizes for your drone in manual or
contact manufacturer

If you mount anything on top of the mount make sure it has prop clearance a simple checking method is listed next:

1-Place you DJI Inspire 1 or 2 in travel model with props on and look down from directly above make sure
you have clearance with nothing protruding outside of the drone main body envelope into prop space

2-If you do have payloads in the body envelope or you are unsure make styrofoam size model and affix it with double stick
or velcro. Manually move the jack screw through its full range and make sure there is no interference with the props.

Safeguards
Use a safety lanyard on your mounts. This is one I use : Amazon

MIZUGIWA Stainless Steel Lanyard Cable Tether Safety Wire for Loss Prevention 2 Loops w/Quick Release Ring & Rubber Coating 12" Set of 10