14S 48V 80A 100A 150A 200A 250A 3.7V Li-ion Lithium Battery Protection BMS Board

Description

 

  • Function:

    Note ：  the item is common port ,it is for 3.7V rated Li-ION Battery 

    Highlight：For the same model, its charge current is less than discharge current because Daly PCBAs were updated to well protect customer battery. Any request, Please contact us. 

    Upgrade 13S 80A 120A 150A 200A 300A 400A 500A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance For Drill Motor 48V Lipo Cell

    Model: DL13S (3.7V rated Li-ION Battery not for 3.2V Rated LiFePO4)

    common Version : common port for charge/discharge 

    separate Version : separate port for charge/discharge

    We can customize any PCB from 1S to 30S lithium 

     

    1. Overview

    ◆DL 13S 48V 80A 100A 120A 150A 200A 300A 400A 500A  bms is used for 13 series48V battery pack.

    ◆We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.

    ◆The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.

    ◆According to the customer request we can develop PCM in different sizes and structures.

    ◆BMS manufactured by  high quality Mos and IC imported . Keep your battery long cycle serivce life time.

     

    2. Advantage

    ◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

    ◆Strong load ability, constant discharge current 80A 100A 120A 150A 200A 300A 400A 500A, use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

    ◆IC itself has power balancing function. The circuit is simple and reliable.

    ◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.

    ◆Extreme low power consumption. The consumption of the whole device is less than 50uA.

    ◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.

     

     

    Package Contents

    1 X13S 48V 80A 100A 150A 200A 250A  3.7V Li-ion Lithium Battery Protection BMS Board

    If you have any questions, please contact us in time, we will help you deal with the problem for the first time.

    Shipping
    • Item will be shipped within 24 -48 hours after full payment is received.
    • Normally the shippment to worldwide is used to take 15 to 30 business days, exclude Sat & Sun.
    Payment
    • We accept PayPal only.
    • Payment must be received in 7 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment,because most of orders will be processed instantly and same day dispatched.
    Contact Us
    • If you have any questions, please feel free to email our servicer ，and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
    • We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven't received item in 45 days, please contact us and we will arrange refund or resend
     
     
    Feedback 
     
    • We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply your email as soon as possible, please kindly allow 24 hours(working day) for us to response. Thank you.
    • We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact.

 

 

DataCaciques