eBay

**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK --- Complete water softener comes with : --- 1.5 CUBIC FEET OF RESIN, --- 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), --- FLECK 9100SXT CONTROLLER, --- TWO MINERAL TANKS, --- Salt Tank, BYPASS, --- COMPLETE SYSTEM 50X18X62 inches, --- 3/4 inch or 1 inch connections, --- (14x14x36) BRINE TANK w/safety float, --- AVAILABLE IN BLUE, BLACK OR ALMOND --- You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer.

**Ships Loaded with the Resin in the Tank**

NEW Fleck 9100SXT Water Softener with Free Shipping!

AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!!

We look forward to helping our customers.

Thanks

Doug

Aplus Water LLC

We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!!

Never lose programming during power outage!!!

Series 9100 Twin-Alternating Conditioners •
Light Commercial/Heavy Residential

WORKS GREAT FOR:

• Car Washes
• Club Houses• Factories
• Laundromats• Large Homes
• Office Buildings
• Restaurants

Twin tanks provide continuous soft water.
With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water.

The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of
uninterrupted daily use.

15% savings in both water and salt. Unlike preset systems, the twin-tank
system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen
percent savings in both water and salt.**
** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused.

Only pennies per day to operate.

How the Twin-Tank Softener works.
Water Softening Process
Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft.

Regeneration Process
When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service.

FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK

Complete water softener comes with :
1.5 CUBIC FEET OF RESIN,
24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS),
FLECK 9100SXT CONTROLLER,
TWO MINERAL TANKS,
Salt Tank, BYPASS,
COMPLETE SYSTEM 50X18X62 inches,
3/4 inch or 1 inch connections,
(14x14x36) BRINE TANK w/safety float,
AVAILABLE IN BLUE, BLACK OR ALMOND
You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer.