Digital Clamp Meter Bluetooth Multimeter AC DC Tester 1000V Amper Auto Range
Clamp Meter
Description:
Clamp Meter through the app worked flawlessly and painlessly on android. You are able to check the glow plug current on each glow plug one at a time while sitting in the cab to turn the key, watching the readout on smart phone, just set it to DC amps and it stays there.
Features:
- With 4000 counts display, the clamp meter can measure DC/AC voltage
- AC/DC current, resistance, capacitance, temperature, frequency, diode Test
- It has manual/automatic ranging which can adjust the operation method according to your usage habits
- The jaw size up to 1.77in/45mm to measure a cable which is thick enough
- Through the Backlight function, you can measure in the darkness and read the data clearly by the large LCD screen.
- With this APP-Multimeter, you can transfer the data and analysis it in real time on your phone.
- The mobile APP can be installed on iPhone 4S iOS or Android 4.30 or higher.
- It is up to the standards of IEC1010 Double Insulation, Pollution Degree 2, Over voltage Category Ⅲ and overload protection.
Function:
- √ Data Hold YES
- √ Diode Test YES
- √ Auto power off YES
- √ Backlight Display YES
- √ Overload P rotection YES
- √ Phone APP Connection YES
Specification:
- Range Selection: Auto Ranging
- Max Display: 4000
- Duty cycle:0.1%~99.9%
- Capacitance:51.2nF~100uF
- Frequency:5.12Hz~5.12MHz(0.1%+5dgt)
- Temperature:-20℃~1000℃(-4℉~1832℉)(3%+2dgt)
- DC Voltage: 400mV/4V/40V/400V(0.5%+2dgt) 1000V(0.8%+2dgt)
- AC Voltage: 4V/40V/400V(3.0%+10dgt) 750V(1.2%+3dgt)
- DC Current: 200A(3.0%+10dgt)
- 1000A (0~800: ±3.5%+10dgt; 800~1000:±6.5%+10dgt)
- AC Current: 400A(3.0%+10dgt)
- 1000A(0~800: 3.5%+10dgt; 800~1000:±6.5%+10dgt)
- Resistance: 400Ω(1.0%+3dgt)
- 4kΩ/40kΩ /400kΩ/4MΩ(1.0%+2dgt)
- 40MΩ(1.5%+3dgt)
DC Voltage |
Range |
Accuracy |
Resolution |
400mV |
±(0.5% of rdg + 2 digits) |
0.1mV |
4V |
1mV |
40V |
10mV |
400V |
100mV |
1000V |
±(0.8% of rdg + 2 digits) |
1V |
AC Voltage |
Range |
Accuracy |
Resolution |
Frequency |
4V |
±(0.8% of rdg + 3 digits) |
1mV |
40~400Hz |
40V |
10mV |
400V |
100mV |
750V |
±(1.2% of rdg + 3 digits) |
1V |
DC Current |
Range |
Accuracy |
Resolution |
200A |
±(3.0% of rdg + 10 digits) |
0.1A |
1000A |
0~800A |
±(3.5% of rdg + 10 digits) |
1A |
800~1000A |
±(6.5% of rdg + 10 digits) |
AC Current |
Range |
Accuracy |
Resolution |
400A |
±(3.0% of rdg + 10 digits) |
0.1A (50~60Hz) |
1000A |
0~800A |
±(3.5% of rdg + 10 digits) |
1A (50~60Hz) |
800~1000A |
±(6.5% of rdg + 10 digits) |
Resistance |
Range |
Accuracy |
Resolution |
400Ω |
±(1.0% of rdg + 3 digits) |
0.1Ω |
4kΩ |
±(1.0% of rdg + 2 digits) |
1Ω |
40kΩ |
10Ω |
400kΩ |
100Ω |
4MΩ |
1kΩ |
40MΩ |
±(1.5% of rdg + 3 digits) |
10kΩ |
Capacitance |
Range |
Accuracy |
Resolution |
51.2nF |
±(3.0% of rdg + 10 digits) |
10PF |
512nF |
±(2.5% of rdg + 5 digits) |
100PF |
5.12μF |
1nF |
51.2μF |
10nF |
100μF |
±(5.0% of rdg + 10 digits) |
100nF |
Frequency |
Range |
Accuracy |
Resolution |
Sensitivity |
5.12Hz |
± (0.1% of rdg + 5 digits) |
0.001Hz |
Sine wave 0.6V~10V rms (5.12MHz: 1.5V~10V rms) |
51.2Hz |
0.01Hz |
If input voltage over range, need adjust |
512Hz |
0.1Hz |
|
5.12kHz |
1Hz |
|
5.12kHz |
10Hz |
|
512kHz |
100Hz |
|
5.12MHz |
1kHz |
|
Temperature |
Range |
Accuracy |
Resolution |
℃ |
-20~150℃ |
± ( 3℃+ 1digit ) |
1℃ |
150~1000℃ |
± ( 3% of rdg + 2digits ) |
Package List:
- 1 x Clamp meters
- 1 x Test Lead
- 1 x English manual