RGB Spectrum CAT LINX HDBaseT Receiver

- Part Number:   CAT RPS

- NEW

HDBaseT locally powered transmitter (PSE) with HDMI/DVI/RS-232

- HDCP compliant

- HDMI with audio extended

- up to 150 meters over CAT6 cable


- Supports RS-232 up to 115k baud rate
 

Signal Type:     HDMI

Pixel Clock Rate:  25 MHz - 165 MHz

Maximum Resolution:   1920x1200/72

Connectors: HDMI/RJ-45

Weight: <1 lb

Power Consumption: 3.5 watts

Audio:     All HDMI embedded audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192KHz sample rate)

DDC: Pass-through DDC for reading EDID directly from remotely connected LCD and HDCP handshake

RS-232:   Bidirectional (full-duplex); any baud rate up to 115,200

PoH Power over HDBaseT meets IEEE 802.3af standard. PD side identifies as Class 2 (3.84–6.49 watts).

Actual power consumption of PD side is 5.5 watts max

Operating Temp. +32 to +122 °F (0 to +50 °C)

Storage Temp. - 40 to +158 °F (-40 to +70 °C)

Humidity 10% – 90% RH, non-condensing

Safety: CE

EMI/EMC CE FCC Class A

MTBF 90,000 hours (calculated estimate)

Cable Category 6 Required