| | - 100% Brand New Hight Quality
- Window Glass Film
- Material: Environmental PVC
- UV protection: 90% Anti-UV
- Adhesive: Comes with adhesive on the back of Film
- Waterproof function: Waterproof
Use: glass surfaces (such as windows, sliding doors, shopwindow) Usage: Decorative, heat insulation, anti-UV, protection of privacy, etc.
- Dimensions
- Thickness: 0.08mm
- Width: 90cm
- Length: 5m or 3m
- Recognized fashion trend frosted windows glass privacy decorative film.
- No need to use glue, no need to change glass, easy to apply, block vision more effectively.
- Easy to apply for more privacy, easy to remove without leaving any sticky residue.
- Easily adheres straight to the glass, windows, mirror or any smooth surface
- Made with high quality, removable and waterproof vinyl.
- Come with instructions for installation.
- Instructions for applying window film:
- You will need:
- 1 spray bottle filled with water and 2 drops of dishwashing detergent
- Credit card wrapped in a dust free cloth
- Squeegee if doing large area
Stanley Knife to trim if necessary
- 1. Before applying Frost Co Window Film thoroughly clean the glass.
- Remove any spots of dried paint and wash with clean soapy water.
- Any dirt or lint on the glass will be trapped under the film and look unsightly.
- Do not use window cleaning spray, as it can damage the film.
- 2. Spray the glass liberally with the water/detergent mix.
- 3. Place your design on a flat surface.
- Carefully peel off the backing paper by pulling it flat back on itself.
- 4. Spray the exposed surface of the film with water/detergent.
- Lightly spray your hands to stop the film sticking to them.
- 5. Carefully pick up the laminate, and slide into position on your glass.
- Keep the film smooth. It will continue to move, providing the glass is wet.
- Reapply water if necessary.
- 6. Once in place push out the bubbles with the credit card wrapped in a soft cloth. Push from the centre out.
- 7. If you are doing a large area, spray the film with the water and use a squeegee.
- The water will allow the squeegee to glide over the film.
- 8. Wipe away any excess water.
- There may be some water marks left on the film, however this will dry/evaporate over time.
- 9. To trim if required: Sandwich the blade between the credit card and edge of frame.
- Run the Stanley knife down the edge using the credit card to push it against the frame.
- 10. To remove bubbles gently pop with a pin and rub.
- 11. To remove white crease marks, run the flame of a lighter over the film and rub with finger.
- Fast Shipping From Sydney - Not Overseas
- 1 x Frosted Window Glass Film
| |