ESC

Features:

The NHX Momentum 80A Plus v2 ESC is specifically designed for 1/10 R/C Crawlers using brushed motors (Momentum 540 Plus v2). The ESC is ready to crawl with excellent linear throttle under all track and terrain conditions. Its Initiative Hold Braking provides unprecedented stopping power on steep slopes, eliminating jerky stops. The 5Amp BEC is ideal for those High Torque, High Voltage Servos. 

Specifications:

Car Type: 1/10 Crawler / Basher
Motor Type: 540 Brushed
Motor Connector: 3.5mm Bullet
Battery: 2-3 Cell Lipo, 4-9 Cell NiMH 
Battery Connector: Deans
Continuous Current/Burst Current: 80A/320A 
Resistance: 0.0014ohm
BEC: 6.4v/7.4v Switchable, 5amp (Switch Mode)
Dimensions: 35mm x 42mm x 27mm
Waterproof
Programmable with Optional Program Card 

---------------

MOTOR

NHX Momentum v2 540 Plus Brushed Crawler Motors are high-performance 540 motors designed for competitive RC Crawling and Backyard Bashing.

The 540 Plus Brushed Motors feature premium quality materials with high-strength magnets for unmatched brushed motor speed and torque. Besides its performance, the motors feature direct-solder wiring tabs for flexible soldering options. The 540 Plus v2 Motors are designed to be rebuildable with an easily accessible commutator and replaceable brushes and springs. The 540 Plus motor also incorporates a New Oversized 5-Slot Skewed Armature that yields better performance, a smoother ride, and precise control.

Features:

NEW! Oversized 5-Slot Skewed Armature Design
Precision Balanced Armature, Smooth and Reliability
NEW! 4 Pole High Gauss Magnet Can Design
CNC Machined Hardened Iron Can      
24K Gold Plated Low Resistance Solder Tabs   
Anti-Interference PCB Capacitors Built into the Endbell
High RPM Precision Bearings    
High Current, Low Resistance Japanese Carbon Brushes
Rebuildable with an Easily Accessible Commutator and Replaceable Brushes and Springs
Designed explicitly for R/C Crawlers that Require Precise Control
Excellent Torque, Precision Movement, and Long Run Times
Specifications:

Vehicle Type: Designed for 1/10 Crawlers / Bashers
Type: 540 Brushed
Oversized 5-Slot Skewed Armature
Turn: 13T
Voltage: 7.4V (2S Lipo)
No Load RPM @7.4V 15,000 +- 12%
Rotation: CCW (counter-clockwise)
Shaft Dia: 3.12mm (1/8")
Motor Dia: 36mm
Motor Length: 56mm (can & endbell)
Weight: 180g Avg.
Includes Pre-Soldered 3.5mm Bullet Connector Wire Leads 

---------------

PROGRAMMING CARD

The pocket-sized NHX Momentum LED program card has been specifically designed to work with the brushed Momentum 80A Plus crawler ESCs. It is straightforward and intuitive to use and makes the programming of the Momentum brushed ESCs a simple matter.

The program card allows you to make the following adjustments:

• Initial Brake Force: 5%, 13%, 21%, 29% (default value 5%)

• Low Voltage Cut-Off: This function mainly prevents the lithium battery from over-discharging. Settings are No-Protection, 3.1V, 3.3V, 2.9V. We do not recommend that you use the No-Protection setting for obvious reasons.

• Initial Drag Brake Force: 100%, 90%, 80%, 70% (default value 100%)

• Maximum Reverse Force: 100%, 75%, 50% (default value 50%)

• Start Modes (also called "Punch"): Soft, Medium, Aggressive (default value Medium)

Features:

Simple and easy to use
LED readout for simplicity
Specifically designed for Momentum 80A Plus brushed crawler ESCs
Pocket size
Easy reset function back to factory settings