Functions:
1、Fully support HRV07,support programs change and order programs.
2、Support led drivers with PWM, highly improved refresh rates with static screens and dynamic screens.
Type | Typical value | Max value |
Supported screen type | single color, dual-color,full-color, real pixel,virtual pixel. | |
Supported LED drivers | MBI5026/MBI5030/MBI5036/ MBI5039/MBI5042/MBI5050/MBI6024/ LPD6803/DM413/DMX512/ZQL9726 TCD62D722/TC62D766/MBI5050/MBI6024 | |
Pixels by single sending card | 1280×1024(dual ports) | |
Number of receiving cards connected by cable | <100 | 256 |
Pixels by single receiving cards | 256 x192(full color) 1024 x512(dual color) | 512×384(full color) 1280 x512(dual color) |
RGB data groups by single receiving card | 16-24 | 24 |
Lines by one group RGB | 1/2/4/8/16/32 | 32 |
Grey grades | 4096(4k) | 65536(64k) |
Data CLK frequency | 15.62MHz | 31.25MHz |
Refresh rate | 180Hz | >3600Hz(如MBI5042) |
Brightness wastage | 15~20% | <5% |
PWM brightness adjust degree | 256(may automatically adjust by brightness sensor) | |
Electronic current plus brightness adjustment grade | 64/256(according to led drivers) | |
Dot by dot revise pixels by PWM brightness | 64x64 | 256x256 |
Pixels on open circuit and short circuit error detection | static:2048x16;1/2:1024x16; 1/4:2048x16;1/8:4096x16;1/16:8192x16 | |
Fiber transmission distance | Multi-mode fiber :500meters; single-mode fiber:10KMs | |
Other functions | Power on gradual protection 、OE Polarity switch protect screen scan tubes, led screen self-detecting | |
No sending card function | Sending images by 1000M network card PC |