Protect 1206i (new ‘2016’ version) Detector of bugs and digital transmissions


Dieser Detektor für Abhörgeräte ist für zwei verschiedene Standards von Audiowanzen konzipiert worden.

Zum Einen für die weitverbreiteten analogen Audiowanzen und zum Anderen für digitale GSM- und Bluetooth-Wanzen die sich immer größerer Beliebtheit erfreuen.

Gerade digitale Wanzen wie GSM-Abhörgeräte, die die Sprachsignale über das normale Handynetz versenden und Bluetooth oder Wifi-Wanzen haben eine sehr schwache Sendeleistung und eine digitale Modulation, was die Auffindbarkeit für gewöhnliche - nicht für digitale Wanzen ausgelegte - Wanzensuchgerät erschwert.

Für diese kompromisslose Ausrichtung des Gerätes wurden auch zwei eigenen

Empfangseinheiten mti je einer eigenen auf deren bereich abgestimmte Antenne verbaut.

Der eine Empfänger dient der Detektion uns Lokalisation von Digitalen Abhörwazen im 2,4 GHz bereich, der andere Empfänger für analoge Wanzen im Bereich von 40 Mhz bis 4 Ghz.

Die hochwertige mikroprozessor gesteuerte Elektronik ist in einem Vollmetallgehäuse untergebracht.

Wenn Sie sich bei der Wanzensuche auf ein Abhörmikrofon zubewegen bekommen Sie zum Einen eine optische Rückmeldung über den 16-Stelligen LED-Balken der höher ausschlägt, wenn sich die Entfernung zur Wanze verringert, und zum Anderen durch den eingebauten Vibrationsalarm der gerade für verdeckte Suchaktionen ideal ist.

Außerdem kann ein Geräuschgenerator aktiviert werden, der die Suche akkustisch unterstützt.


Technische Daten des Wanzensuchgerätes für GSM-Wanzen:

Frequenzbereich     Antenne 1: 50—4000 MHz
Antenne 2: 2.44 GHz
Stromversorgung     Zwei AAA Batterien oder Akkus
Abmessungen     

Ohne Antennen: 120×70×16 mm
Mit Antennen: 220×70×16 mm
Energieverbrauch     Bis zu 30 mA
Dauerbetriebszeit     Bis zu 20 Stunden



Introducing the all-new ‘2016’ version

New Features

  • New wide-band antenna (for ANT1 socket)

    Wider coverage, particularly at lower frequencies, has made it possible to increase the detection distance of a conventional VHF/UHF bug by 2-3 times, while saving perfect sensitivity at the higher bands (GSM, Wi-Fi, Bluetooth, etc.)

  • New Micro-Pointer microwave antenna (for ANT1/ANT2 socket)

    This is the first time when an affordable RF detector gets the microwave log-periodic directed antenna supplied in the standard set. 2-4 times longer distance to all sources above 2GHz (Wi-Fi 2.4GHz, Wi-Fi 5GHz, Bluetooth, Wi-Max, LTE High, etc.). The directionality provides easy pinpointing of a wireless source. Now you not only know that there is a Wi-Fi source, but can quickly pinpoint it

  • Increased dynamic range

    The bargraph now rises quickly to weak signals and increases slowly to strong signals, thus giving the opportunity to locate the source

  • New Attenuator

    The new algorithm widens the dynamic range even more, making the location procedure easier. Turn on the attenuator near a strong source when the bargraph lights fully and then it will drop and then increase further, therefore making it possible to locate more precisely.

Other features

  • Extra high sensitivity to Bluetooth, Wi-Fi 2.4 GHz, Wi-Fi 5GHz and wireless video cameras
  • The perfect tool for searching for digital and analogue transmitters of all types
  • Frequency range:
    • Main antenna ANT1: 50-6000 MНz
    • Auxiliary antenna ANT2: 2.4 - 2.48 GНz, 4.9 - 5.875 GНz
  • 16-segment bargraph indicator
    • 3 modes: sound, vibration and mixed
    • Correlation function discovers FM-transmitters by the presence of correlation (probing sound is used)
    • 2 levels of sensitivity (attenuator)
    • Long battery life
    • Durable metallic body
    • Microprocessor controlled

The Protect 1206i is a new class of a counter surveillance device. Unlike all typical searching devices it can detect modern hidden bugs which use such protocols as Bluetooth and Wi-Fi. Such bugs, especially Bluetooth types, are practically undetectable by common RF detectors due to their very low transmitted power and a special type of modulation. The Protect 1206i uses a separate channel with a high, (2.44/5 GHz) frequency pre-selector to detect and locate Bluetooth and Wi-Fi with a much higher sensitivity. The unit also then processes the demodulated signal in order to identify which protocol has been detected.

In addition the unit can detect all types of conventional bugging devices (FM-modulated transmitters, digital transmitters, GSM-bugs, etc.) using its distinctive features:

  • Active correlation: inspecting dangerous places with the probing sound impulses while watching the demodulation bar graph
  • Recognition of type of digital transmission: GSM, Bluetooth, Wi-Fi, DECT
  • 4 working modes: silent, sound, vibration and mixed
  • Wide dynamic range thanks to the 16-segment bar graph

Specification

  • Frequency range
    • Antenna 1: 50 - 6000 MHz
    • Antenna 2, GHz: 2.4 - 2.48
                                  4.9 - 5.875
  • Power: Two ААА batteries (2xLR03)
  • Dimensions
    • without antennas, mm × mm × mm: 120×70×16
    • with antennas, mm × mm × mm: 210×70×16
  • Current consumption: Up to 30 mA
  • Operation duration: Up to 20 hours
  • Indications: Active antenna, Low battery, Mode, Identification, Attenuator, Secondary demodulation

Micro-Pointer Antenna

  • Frequency range: 2-12 GHz
  • Type: Log-periodic array
  • Model name: LPDA-12
  • Dimensions: 53 x 84 x 9 mm
  • Connector: SMA Male