1. After the Bluetooth module is inserted into the UART port, the battery parameters can only be viewed in the Phone App.
2. After the UART module is inserted into the UART port, the parameters can only be viewed on the computer.
They share the same port, so it is not possible to use the bluetooth and UART modules at the same time
3. If you choose 485 module and want to check the parameters on your computer, you must leave a message to tell us
1. The mobile phone APP monitors the battery charge and discharge status. Single cell overvoltage and undervoltage, battery pack overvoltage and undervoltage, balance voltage, high and low temperature, and release value are adjustable.
2. The communication module is connected to the computer, monitors battery data, sets parameters, reads the BMS communication protocol, and communicates with the device.
3. Double protection of imported IC software and hardware. The software runs a real-time monitoring program plus secondary protection. Low power consumption for sleep and standby, high quality electronic components.
4. It calculates the remaining capacity and charging capacity of the battery based on the fraction of current and time.
5. Temperature control detection: BMS built-in balanced power supply temperature control detection. Adjustable high and low temperature protection function, the temperature sensor is sturdy and not easy to break.
6. The App display interface has a speed measurement function. It can accurately detect the speed and calculate the remaining mileage according to the hall pulse.
3) Just check the parameters on the mobile app to choose BMS with UART port, no need to order any modules.
11. The APP software reference interface displays:
01) Percentage capacity
02) Temperature
03) Charging time
04) Total voltage
05) Remaining capacity
06) Power
07) Voltage range
08) Voltage difference
09) Charge on/off
10) Discharge on/off
11) Protection status
12) Cell Balancing
13) Voltage per cell
14) Nominal capacity
