BAFANG E-bike setting wheel diameter and releasing speed limit programming line

his
is the programming line specially used for the BAFANG CAN protocol
motor. It can solve the problem of setting the wheel diameter and
releasing the speed limit. When your M600 motor is limited by the
factory to 32KM/H, do you feel that the speed is too slow to satisfy
You, when you change to a new frame, because the size of the wheel
diameter and the size set in the motor are different, and the speed
displayed on the display is wrong, it always feels very disappointing,
this programming line can solve your troubles and make you happy stand
up. This programming line is simple and easy to operate. When you have
questions and do not understand, you can consult our sales staff and we
will bring you professional explanations and introductions.

Note:

Some display screens are special.

When
the programming line button is pressed, it is necessary to re-enter the
instrument setting before the setting can be successful.


Operation introduction:


1.First, the motor is connected and powered on

2.the motor is connected to the main line of the instrument

3.the interfaces at both ends of the programming cable are connected to the motor and the display screen    respectively

4.the USB plug of the programming cable is connected to the USB interface of the computer or display          screen

5.The
programming line indicator lights up to indicate that the connection is
successful. For detailed              tutorials, please see the video
tutorials

6.If
there is a 25 fault code after connecting, just press the module button
to return to normal. For some models, when the wheel diameter setting
is switched, the wheel diameter size of the display screen does not
change. At this time, you need to exit the setting and return to the
main page of the display screen to re-enter the setting. Then you can
see the wheel diameter you set.


Introduction and operation of programming line buttons:

Press 1 time in a row: wheel diameter 29 inches 60KM/H  -2330mm

Press 2 times in a row: wheel diameter 27.5 inches 60KM/H  -2240mm

Press 3 times in a row: wheel diameter 26 inches 60KM/H  -2100mm

Press 4 times in a row: wheel diameter 20 inches 60KM/H  -1550mm

Press 5 times in a row: wheel diameter 27.5 inches 25KM/H  -2240mm

If
there is a 25 fault code after connecting, just press the module button
to return to normal. For some models, when the wheel diameter setting
is switched, the wheel diameter size of the display screen does not
change. At this time, you need to exit the setting and return to the
main page of the display screen to re-enter the setting. Then you can
see the wheel diameter you set.


This programming line is only suitable for bafang-CAN protocol motors after 2020, and motors produced before 2019 cannot be used.


Shippi ng:


International shipping is available. Please be aware that international shipping can include delays involving any number of postal and or customs organizations.  Delays can occur at any point within these systems. All items are shipped within 48 hours unless otherwise noted. Once a package has been turned over to the postal service no seller has any control or influence over the shipment, handling or destination of any package.

If you want fast shipping ,you can choose other shipping way, like EMS, FEDEX,DHL, it takes 2-3 days, but higher fees.


Customs fees:

Customs fees and local taxes are the sole responsibility buyer. The seller has no control over the imposition or collection of these potential charges. As a responsible eBay seller MTB Tools does not commit or contribute to customs fraud of any kind.


Return Policy:


If you dont like the items or other reasons that you don't want it, we offer return. Pls contact us in 14 days after receiving the items,you pay for the back shipping fees.Once we receive it, we will refund you in 3 business days. And we are also appreciated with you good feedback.