Providence DVI-1M Dual Vitalized Routing Interface Effector

Description

■Features

●Dual Vitalizer Included

This product suppresses changes in the sound quality of the signal as much as possible to achieve low impedance, and prevents changes or deterioration in the sound quality due to the pedal system or long cables, thus stabilizing the signal.

Vitalizers are provided for two lines, one after IN input and the other after RETURN input, and they can function in any routing set.

●SEND/RETURN

Each input/output jack is laid out so that it can be efficiently wired as the input/output of the pedal system (board).

●TUNER Out (can also be used as a 3-parameter box)

Normally a tuner is connected, but it can also function as a three-para box by switching the internal switch.

●MUTE CTL

You can use a commercially available foot switch (latch type) to mute the audio signal. If you use SEND/RETURN to set the pedal system, you can mute the pedal system at the end of the pedal system to shut out noise, unwanted reverberation, etc.

●pop noise reduction circuit

The mute circuit uses a relay contact circuit with no sound quality change. In addition, it is equipped with a circuit to reduce pop noise when switching the mute switch. It provides a stable, low-noise environment with a design that is not affected by connected effects or external electrical influences.

●POWER/MUTE(LED)

Operation can be recognized by lighting blue when the power is ON and flashing red when the power is MUTE.

●THRU

The THRU jack is a stereo phone (TRS) with two completely independent signal lines (tip and ring) and ground lines (sleeve). From the pedal system, it can be used for a variety of purposes, such as channel control patches for amplifiers or dual signal connections with external devices.

●Wide Voltage DC Input

The input DC power supply voltage can be used in a wide range of AC adaptors (Center Tip Minus, Voltage Regulator Type) for various musical instruments from + 9 V to + 18 V. It also works with 006P batteries (internal storage).

■SPECIFICATIONS

●2 Vitalizers

●Input/output: IN, OUT, SEND, RETURN, TUNER, DC IN, MUTE CTL, THRU-THRU (TRS)

●Controls:

TUNER output: Changeover of operation of always-on output/MUTE CTL linkage (internal slide switch),

MUTE: External foot switch (latch type)

●Power supply: 9 V battery and 9 ~ 18 VDC stabilizing type AC adapter (sold separately)

●Size: 115 (D) x 78 (W) x 36 (H) mm

●Weight: approx. 200 g (without battery)