Tang Nano 9K FPGA Development Board GW1NR-9 RISC-V HDMI w/ 1.14"/4.3"/5"/7" LCD

Popular

    Product Introduction

    Features:
    S-SRAM: 17280 bits S-SRAM
    User Flash: 608K bits User Flash
    Display interface: HDMI, 40P RGB interface, 8P SPI screen interface
    With IF card holder
    Downloader: Onboard USB-JTAG&UART downloader
    Core configuration:
    Logical Units (LUT4): 8640
    Register (FF): 6480
    Distributed Static Random Access Memory SSRAM (bits): 17280
    Block Static Random Access Memory B-SRAM (bits): 468K
    The number of block static random access memory BSRAM (pcs): 26
    User Flash (bits): 608K
    PSRAM (bits): 64M
    High-performance DSP module: support 9x9, 18x18, 36x36bit multiplication and 54bit accumulator
    Multiplier (18x 18 Multiplier ): 20
    SPI FLASH: 32M-bit
    Flexible PLL resources: 2 Phase Locked Loops (PLLs)
    Debugger: Onboard BL702 chip, providing USB-JTAG download and USB-UART serial port printing functions for GW1NR-9
    Connector: TF card holder, 2x24P 2.54mm pin header pad
    Keys: 2 user programmable keys
    LEDs: 6 programmable LEDs onboard
     
    Package include:
    Motherboard X1
    2.54mm pin header X2
    Type-C data cable X1
    with or without LCD is according buyer choose
     
     
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    Tang Nano 9K FPGA Development Board GW1NR-9 RISC-V HDMI w/ 1.14"/4.3"/5"/7" LCD

    Product Introduction

    Features:
    S-SRAM: 17280 bits S-SRAM
    User Flash: 608K bits User Flash
    Display interface: HDMI, 40P RGB interface, 8P SPI screen interface
    With IF card holder
    Downloader: Onboard USB-JTAG&UART downloader
    Core configuration:
    Logical Units (LUT4): 8640
    Register (FF): 6480
    Distributed Static Random Access Memory SSRAM (bits): 17280
    Block Static Random Access Memory B-SRAM (bits): 468K
    The number of block static random access memory BSRAM (pcs): 26
    User Flash (bits): 608K
    PSRAM (bits): 64M
    High-performance DSP module: support 9x9, 18x18, 36x36bit multiplication and 54bit accumulator
    Multiplier (18x 18 Multiplier ): 20
    SPI FLASH: 32M-bit
    Flexible PLL resources: 2 Phase Locked Loops (PLLs)
    Debugger: Onboard BL702 chip, providing USB-JTAG download and USB-UART serial port printing functions for GW1NR-9
    Connector: TF card holder, 2x24P 2.54mm pin header pad
    Keys: 2 user programmable keys
    LEDs: 6 programmable LEDs onboard
     
    Package include:
    Motherboard X1
    2.54mm pin header X2
    Type-C data cable X1
    with or without LCD is according buyer choose
     
     
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques