NOTE:
Use shock oil (not included) to add only enough oil for a heavy coating. Do not fully fill shock body.
Features:
Internally these use shock oil (not included) instead of the typical friction dampening and employ bladder seals for consistent rebound dampening
CNC machined Aluminum shock bodies
Threaded shock bodies for quick pre-load adjustments
Three spring sets are included for fine tuning
Specifications:
Material: Aluminum
Color: Red / Green / Gold / Blue / Grey
Total Length: 44.2mm/1.74in
Length Eye-to-Eye: 39mm/1.54in
Travel (without oil): 10.2mm/0.4in
Suit For: Axial SCX24 or other mini/micro crawler car
Installation:
Disassemble shock by sliding spring down to grasp shock body.
Turn shock upside down to remove assembly lubricant.
Cycle shock slowly to remove air bubbles.
Add a few more drops and repeat cyling.
Back preload collar against shock top.
If shock locks out or don't have full compression,it's overfilled with oil.
Next we'll assemble the ball pivots.
The brass pivot is used at the top of the shock.
Slide and O-ring onto the samlled end and roll it over the ball and against the larger flange.
Insert pivot into shock top
install second O-ring