![]() |
|
![]() |
1. The filament dryer keeps the filament dry. The filament can be better preserved.
2. Dry the damp filament. |
![]() |
JAYO Packaging --Vacuum-sealed packaging keeps our 3D printer filaments in optimal storage condition. No dust, no dirt before opening --All of our 3D printer filaments are vacuum sealed, along with a desiccant pack that ensures a good print result. --Dedicate to create a better buying experience for our customers is the most important thing. |
1. [Budget- friendly] 1.1KG filament instead of 1kg filament
2. [Neatly wound filament] Smooth print and no tangle 3. [Wide Compatibility] Spool sizes are suitable for kinds of printers, filament holder, drying box |
Filament | Printing temperature | Bottom plate temperature | Printing speed | Wire diameter | Length |
TPU | 195-205°C | No glue water is required for heating from 50-60 ° C | 20 - 40mm/s | 1.75 ± 0.03 mm |
0.5kg=165m |
TPU-SILK | 210-220 °C | 30 - 50mm/s | 1.1kg | ||
SILK | 205-215°C |
1.glue water is required if it is not heated 2.No glue water is required for heating from 50-60 ° C |
40 - 60 MM / s | 1.75 ± 0.02 mm |
|
PLA | 200-210°C | 50 -100 MM / s | |||
PLA MATT | 205-215°C | ||||
PLA Leuchtend | 195-205°C | ||||
PLA+ | 205-215°C | ||||
PLA META | 185-195°C | 50 - 150 MM / s | |||
HIGH SPEED PLA | - |
190-210℃ 50-150mm/s 210-230℃ 150-300mm/s 230-260℃ 300-600mm/s |
|||
PLACF | 215-225°C | 40 - 60 MM / s | |||
PETG | 220-230 °C | 1.glue water is required if it is not heated 2.No glue water is required for heating from 60-70 ° C |
|||
EABS | 225-235°C | 1.75 ± 0.03 mm |
0.65 kg=256m | ||
ABS | 250-260°C | No glue water is required for heating from 80-100 ° C | |||
PVB | - | 1.glue water is required if it is not heated 2.No glue water is required for heating from 50-60 ° C |
200-210℃ 50-100mm/s
210-230℃ 100-200mm/s
|
1kg |
|
ANTISTRING PLA | - |
205-215℃ 50-100mm/s
215-245℃ 100-230mm/s
|
1.75 ± 0.02 mm |
1.1kg | |
ASA | - | No glue water is required for heating from 90-110 ° C |
250-260℃ 50-100mm/s
260-280℃ 100-200mm/s
|
1kg | |
Neatly wound filament with cardboard spool: PLA / PLA+ / PLA Matte / PLA Meta / PLA+ SILK / WOOD / PLACF / PETG / TPU-SILK / High Speed PLA / Easy ABS Not neatly wound but tangle free filament: PLA Marble / ABS / TPU |
High Speed PLA | |
![]() |
![]() |
Easy ABS | |
![]() |
![]() |
|
|||||||||||||||
|
|||||||||||||||
Tips:
|
|
|
Trust all of your prints to JAYO! We strive to make 3D printing an enjoyable and error-free process for our customers. That’s why each filament is carefully formulated and thoroughly tested to save you time and effort every time you print. |
|
![]() |
![]() |