Underfloor Heating Manifold
Manifolds
for use on underfloor heating systems. These consist of two manifold
brass, one for the flow and one for the return, complete with ball
valves and drain/filling valves. On the flow bar each port has a flow
indicator, with isolator including an easy to read gauge glass. Each
port on the return bar is equipped with an integral control valve and
protection cap which allows the user to adjust volume of water or can be
removed to accept a thermoelectric type head. Our manifold comes
complete with air vent and two ball valves.
Product Features and Benefits
Can be assembled to suit left or right hand supply depending upon project type.
Supplied pre-mounted on installation brackets Isolating flow indicators on the flow manifold Valves on return manifold accept a thermoelectric type head for remote control of each zone
Connection Size: 1" Pipes conectors size : variable Working Pressure: ( 0-10 bar) Max Temperature: (120 C)
MIXER SET BLENDING VALVE
The valve works at lower temperatures than radiator
systems with temperatures between 35*C to 65*C depending upon the
construction of the floor.The blending valve is the heart of the control
system with hot water from the boiler mixed to supply water at the
correct temperature back to the underfloor pipework.The supply
temperature of the water can be adjusted to suit the construction of the
floor.
GPA25-6 III AUTO ELECTRIC PUMP
|
|
-
The pump has 9 kinds of setting including auto adaption mode AUTO(factory settings).In most
cases,you can start the pump without need to make any adjustments and
automatically adjust it to meet the actual needs of the system
- The running noise of pump and the whole system is low
- Low energy consumption compared with the conventional circulating pump.The minimum energy conumption of the pump can reach 5W
-
The pump is most suitable for: stable heating system with variable
flow, heating system with variable pipeline temperature,home heating and
domestic water supply system,industrial circulation system
|
MANIFOLD MAIN FEATURES WORTH MENTION ABOUT
|
|
PRE-ASSEMBLED
The manifold flow and return bar
come pre-assembled
with fixture bracket ready for wall installation.
|
AUTOMATIC AIR VENT AND PRESSURE GAUGE
The bottle automatic air vent automatically
removes the air from the manifold while the pressure gauge shows the
correct pressure in bars.
Both end units has drain valves for draining down and filling purposes.
|
|
|
FLOW METERS
Situated on top bar
they allow you to clearly read the flow as well as increasing or decreasing it.
It has red marker indicator and removable sight glass for quick cleaning.
|
| | |
|