JAYO 3D Resin 405nm UV for LCD/DLP/SLA 3D-Resin Printer

Parameter :

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s

• Shake the bottle before use
• Recommended temperature 20°C - 25°C
• Protect it from dust and direct sunlight
• Keep it out of the reach of children.
• Avoid skin and eye contact with liquid resin. Wash off immediately with plenty of water if resin gets on the skin.

• Shore Hardness: 80-85D;
• Shrinkage: 7-9%
• Flexural strength: 35±10%MPa
• Extensibility: 20-40 Mpa
• Elongation at break: 5-15
• Shelf life: 12 months

Vivid color

JAYO 3D standard resin uses high-quality formulation technology to develop multi-colored resin products with low odor and high flow properties Monochrome Black, Monochrome White, Monochrome Gray, Monochrome Skin, Monochrome Orange, Monochrome Green; clear, clear blue, clear red, clear green A total of 10 colours

Low shrinkage

The shrinkage rate of JAYO resin is between 7-9% and the pressure effect is good. After curing, it can maintain the three-dimensionality of the model for a long time, which is a good manifestation of you bringing out your imagination to the fullest.

High stability

JAYO branded resins are compatible with most 405nm LCD/SLA resin printers on the market due to their excellent performance for general modeling and industrial prototyping