NEED LARGE QUANTITY MAKE US AN OFFER!!!! WE need these gone!

Selling these LUS Face Mount Hangers in ZMAX Finish in 2 packs, sold in group of 2. Brand new broke down the case for people that do not need 100 pcs. But discount of 40% when buying 4 pairs or more, that is 40% for 8 or more total pieces! 

If you need just 2 or 100 we got you covered! SOLD IN PAIRS - SOLD IN LOTS OF 2

NEED MORE THEN 20 Pieces SEND OFFERS WE HAVE 200+

Simpson Strong-Tie LUS hangers are a light capacity joist hanger that utilize double shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. The Strong-Tie LUS26Z face mount joist hanger features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

• Use all specified fasteners.
• Use hot-dip galvanized (HDG) nails with ZMAX and HDG connector products. Use Type 316 stainless-steel nails with our stainless-steel connector products.
• Nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
• Not designed for welded or nailer applications.
• 16d sinkers (0.148" dia. x 3 1/4" long) may be used where 10d commons are specified with no reduction in load. Where 16d commons are specified, 10d commons or 16d sinkers (0.148" dia. x 3 1/4" long) may be used at 0.85 of the table load.
• With 2x carrying members, use 10d x 1 1/2" nails into the header and 10d commons into the joist, reduce the load to 0.64 of the table value.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values