Silicone / Fibreglass Fire Sleeving Protective Heat Shield Sleeve Black φ4~100mm
Silicone / Fibreglass Fire Sleeving Protective Heat Shield Sleeve Black φ4~100mm
Product Information:
- Inner diameter: 4mm-100mm
- Withstand voltage rating: 10KV
- Color: Black
- Temperature range: -60℃~+260℃(the temperature resistance can reach 800℃ within five minutes, and the temperature resistance can reach 1300℃ within 30 seconds)
- Flame retardancy: self-extinguishing ULVW-1
- Products have passed ROHS and other environmental protection certifications.
Product introduction:
1. Fireproof and high-temperature resistant casing, also known as fireproof casing, high-temperature casing, heat-resistant casing, silicon rubber fiberglass casing, made of high-bulk glass fiber casing, and covered with thick oxide Iron red silica gel, which can prevent molten iron from splashing, and is not damaged by high temperature and flame. It has the characteristics that many other similar materials are difficult to replace: high temperature resistance, thermal insulation, flame retardancy, electrical insulation, and chemical stability Performance, weather resistance, cold resistance, water resistance, oil resistance, corrosion resistance, ozone resistance, voltage resistance, arc resistance, corona resistance, etc., especially safety and environmental protection performance, these characteristics make it suitable for protecting soft Pipes, cables and pipelines are the best substitutes for hazardous products such as asbestos.
2. The fireproof casing can be continuously exposed to the high temperature of 260℃ without being damaged. It can withstand high temperature of 1300℃. The destructive test at 1300℃ can last for half an hour. After half an hour, the outer coating begins to be carbonized and the glass fiber is intact.
3. The flame-retardant properties of the fire-proof casing can not only effectively prevent personnel from being burnt and injured by the high-heat pipeline, but also greatly save the cost of heat energy loss.
4. Fireproof casing is mainly used for cable insulation protection in high temperature places such as steel plants, smelters, glass factories, etc., especially for the molten steel that splashes out instantly, the super-thick protective layer of the casing can be excellent for the cables in the pipe Protective effect.
1. Fireproof and high-temperature resistant casing, also known as fireproof casing, high-temperature casing, heat-resistant casing, silicon rubber fiberglass casing, made of high-bulk glass fiber casing, and covered with thick oxide Iron red silica gel, which can prevent molten iron from splashing, and is not damaged by high temperature and flame. It has the characteristics that many other similar materials are difficult to replace: high temperature resistance, thermal insulation, flame retardancy, electrical insulation, and chemical stability Performance, weather resistance, cold resistance, water resistance, oil resistance, corrosion resistance, ozone resistance, voltage resistance, arc resistance, corona resistance, etc., especially safety and environmental protection performance, these characteristics make it suitable for protecting soft Pipes, cables and pipelines are the best substitutes for hazardous products such as asbestos.
2. The fireproof casing can be continuously exposed to the high temperature of 260℃ without being damaged. It can withstand high temperature of 1300℃. The destructive test at 1300℃ can last for half an hour. After half an hour, the outer coating begins to be carbonized and the glass fiber is intact.
3. The flame-retardant properties of the fire-proof casing can not only effectively prevent personnel from being burnt and injured by the high-heat pipeline, but also greatly save the cost of heat energy loss.
4. Fireproof casing is mainly used for cable insulation protection in high temperature places such as steel plants, smelters, glass factories, etc., especially for the molten steel that splashes out instantly, the super-thick protective layer of the casing can be excellent for the cables in the pipe Protective effect.
Features
1. Safety protection to protect the health of workers. The alkali-free glass fiber itself has extremely strong tensile force, will not be wrinkled and broken, is vulcanized, is smoke-free, halogen-free, non-toxic, pure oxygen, non-combustible, and has good insulation characteristics. After the organic silica gel is cured, its safety and environmental protection performance is strengthened, and its protection is effective. Workers are healthy and reduce the incidence of occupational diseases. Unlike asbestos products, which are extremely harmful to the human body and the environment.
2. Superior high temperature resistance. The organosilicon structure on the surface of the fireproof casing contains both "organic groups" and "inorganic structures". This special composition and molecular structure make it integrate the characteristics of organic matter and the function of inorganic matter. Compared with other polymer materials, its most prominent feature is its high temperature resistance and high thermal stability. The chemical bonds of molecules will not break or decompose under high temperature (or radiation exposure). Silicone is not only resistant to high temperatures, but also resistant to low temperatures, and can be used in a wide temperature range. Whether it is chemical properties or physical mechanical properties, the change with temperature is very small.
3. Anti-splashing, multiple protection. In the smelting industry, the temperature of the medium in the electric furnace is extremely high, which is easy to form high-temperature splash (the same is true in the electric welding industry). After cooling and solidification, slag is formed on the pipe or cable, which will harden the rubber on the outer layer of the pipe or cable, and finally Embrittlement and cracking. Furthermore, unprotected equipment and cables will be damaged. The fireproof sleeves coated with multiple silica gels can achieve multiple safety protections. The maximum temperature can be as high as 1300 degrees Celsius, which can effectively block molten iron, molten copper, molten aluminum and other high-temperature molten materials. Splashing to prevent damage to surrounding cables and equipment.
4. Thermal insulation, energy saving and consumption reduction, radiation resistance. In high-temperature workshops, many pipes, valves or equipment have very high internal temperatures. If they are not covered with protective materials, it is easy to cause burns or heat loss. Fireproof casing has better thermal stability than other polymer materials, radiation resistance and thermal insulation, preventing accidents, reducing energy consumption, and preventing the heat of the medium in the pipeline from being directly transferred to the surrounding environment and causing damage to the workshop. The temperature is too high, saving the cost of cooling.
5. Anti-moisture, anti-oil, anti-climatic aging, anti-pollution, and prolong the service life of the equipment. The fireproof casing has strong chemical stability. The organosilicon does not react to oil, water, acid and alkali. It can be used for a long time without aging within 260°C. The service life in natural environments can reach several decades. The pipelines, cables and equipment in these occasions are protected to the greatest extent, and their service life is greatly extended.
6. Ozone resistance, voltage resistance, arc resistance, and corona resistance. The surface of the fireproof casing is coated with organic silica gel, which is not easily decomposed by ultraviolet light and ozone. Fire casing has good electrical insulation properties. Its dielectric loss, voltage resistance, arc resistance, corona resistance, volume resistivity and surface resistivity are among the best in insulating materials, and its electrical performance is minimally affected by temperature and frequency. .
7. Flame retardant, reducing the incidence and spread of fire. If the pipeline is transported with flammable or toxic media, it is easy to cause fire or casualties when leakage occurs. The cable often burns due to local high temperature. The fire sleeve is woven with extremely high temperature resistant glass fiber, and the surface is made of silica gel. There are special materials such as appropriate flame retardants to make it have excellent flame retardancy. Even if a fire occurs, it can prevent the fire from spreading and still protect the internal pipelines intact for a long time.
1. Safety protection to protect the health of workers. The alkali-free glass fiber itself has extremely strong tensile force, will not be wrinkled and broken, is vulcanized, is smoke-free, halogen-free, non-toxic, pure oxygen, non-combustible, and has good insulation characteristics. After the organic silica gel is cured, its safety and environmental protection performance is strengthened, and its protection is effective. Workers are healthy and reduce the incidence of occupational diseases. Unlike asbestos products, which are extremely harmful to the human body and the environment.
2. Superior high temperature resistance. The organosilicon structure on the surface of the fireproof casing contains both "organic groups" and "inorganic structures". This special composition and molecular structure make it integrate the characteristics of organic matter and the function of inorganic matter. Compared with other polymer materials, its most prominent feature is its high temperature resistance and high thermal stability. The chemical bonds of molecules will not break or decompose under high temperature (or radiation exposure). Silicone is not only resistant to high temperatures, but also resistant to low temperatures, and can be used in a wide temperature range. Whether it is chemical properties or physical mechanical properties, the change with temperature is very small.
3. Anti-splashing, multiple protection. In the smelting industry, the temperature of the medium in the electric furnace is extremely high, which is easy to form high-temperature splash (the same is true in the electric welding industry). After cooling and solidification, slag is formed on the pipe or cable, which will harden the rubber on the outer layer of the pipe or cable, and finally Embrittlement and cracking. Furthermore, unprotected equipment and cables will be damaged. The fireproof sleeves coated with multiple silica gels can achieve multiple safety protections. The maximum temperature can be as high as 1300 degrees Celsius, which can effectively block molten iron, molten copper, molten aluminum and other high-temperature molten materials. Splashing to prevent damage to surrounding cables and equipment.
4. Thermal insulation, energy saving and consumption reduction, radiation resistance. In high-temperature workshops, many pipes, valves or equipment have very high internal temperatures. If they are not covered with protective materials, it is easy to cause burns or heat loss. Fireproof casing has better thermal stability than other polymer materials, radiation resistance and thermal insulation, preventing accidents, reducing energy consumption, and preventing the heat of the medium in the pipeline from being directly transferred to the surrounding environment and causing damage to the workshop. The temperature is too high, saving the cost of cooling.
5. Anti-moisture, anti-oil, anti-climatic aging, anti-pollution, and prolong the service life of the equipment. The fireproof casing has strong chemical stability. The organosilicon does not react to oil, water, acid and alkali. It can be used for a long time without aging within 260°C. The service life in natural environments can reach several decades. The pipelines, cables and equipment in these occasions are protected to the greatest extent, and their service life is greatly extended.
6. Ozone resistance, voltage resistance, arc resistance, and corona resistance. The surface of the fireproof casing is coated with organic silica gel, which is not easily decomposed by ultraviolet light and ozone. Fire casing has good electrical insulation properties. Its dielectric loss, voltage resistance, arc resistance, corona resistance, volume resistivity and surface resistivity are among the best in insulating materials, and its electrical performance is minimally affected by temperature and frequency. .
7. Flame retardant, reducing the incidence and spread of fire. If the pipeline is transported with flammable or toxic media, it is easy to cause fire or casualties when leakage occurs. The cable often burns due to local high temperature. The fire sleeve is woven with extremely high temperature resistant glass fiber, and the surface is made of silica gel. There are special materials such as appropriate flame retardants to make it have excellent flame retardancy. Even if a fire occurs, it can prevent the fire from spreading and still protect the internal pipelines intact for a long time.
Anything else you need? - add more items to the shopping basket to qualify for combined flat rate postage.
You can find more products in different material, type, color , sizes and shapes in our shop! If you have special needs, please contact us, we can customize according to your needs!
