100A RGL Current Protection Relay 220V Power Supply Soft Start Board
Note: The color or brand of components will be different in different periods, but the files will be the same.
Name: high-power power supply soft start circuit board This product is not suitable for motor use
Relay: RGL high power super current 100A pure copper pin relay
Size: 67mmX61mmX30mm (height), super small volume
Scope of application: suitable for high-end audio power input, or other large starting current machine applications. The operating power shall be within 2200W. Long term load should be within 1200W!
Applicable range of power supply voltage: AC 150V to 220V.
Main features:
The function of the soft starter board is to reduce the impulse current at the moment of startup, so as to reduce the impact of the machine on the power grid and extend the life of the switch. This board uses super current (100A) pure copper pin relay and super large thermistor NTC 20D-20 to effectively protect the machine from excessive starting current.
This board does not need auxiliary power supply. It has only two terminal blocks, one connected to power input (previously connected to a switch control), and one connected to load. It is very convenient to use.
Working principle:
At the initial stage of power on, the load is powered by the thermistor with negative temperature coefficient. As the temperature of the thermistor rises, the resistance value drops and the voltage rises slowly, thus effectively suppressing the impact of surge current on the line and other electrical appliances. After about 2 seconds, the relay will pull in and short-circuit the thermistor. The power supply will directly supply power to the load through the relay contact, and the load will enter the normal working state.
Weight is 0.07KG
Wiring sequence: power switch soft start voltage transformation
Package:100A RGL Current Protection Relay 220V Power Supply Soft Start Board