T4 T25 Oil Pick Up Pipe Adapter 1.8t Pd 19tdi Conversion 316 Stainless. Custom made by use, really simple mount to change the angle of your pickup pipe on t4 conversion When fitting a 1.8T 20V or PD engine into a T4 Transporter/Eurovan there are a few problems to overcome. One of these problems is that the T4 accepts an engine sat tilted forward. In short, this means you end up with an oil pickup that isn’t pointing down, and isn’t efficiently pickup oil up and feeding your engine. Also used when installing in a T25 at a angle We designed and manufactured these to overcome this issue. You simply unbolt the oil pump pickup’s two bolts. Place this over the pickup pipe and refit the bolts, turn to the orientation required and tighten to torque 316 stainless steel good chance when the vans long gone this bracket will still be going strong We will have mounts and adapters for complete conversion watch this space |