Feature:
A professional converter board for "low resolution to high resolution" high performance video processing card
High-resolution pictures, clear images, and vivid colors through professional DSP chip processing
Strong game compatibility and versatility, it supports various low and high solution games (such as King of Fighters, PS2, XBOX, etc., the game support rate is above 98%, and can be upgraded according to requirements).
Supports various display screens, universal for 15K 24K 31K
Using Method:
Make sure that the input and output cables are connected correctly and then turn on the power. Switch the input signal source through "SW". There are three input channels RGBS / YPBPR / RGBHV. When you switch to the correct channel, you will see the game screen.
Please press the AUTO / DOWN key when the RGBS (CGA, EGA) input mode, the system will automatically scan the signal and adjust the frequency automatically. At this time, the power indicator flashes, and scanning has stopped after the flashing stopped.
The picture may not be full screen. First adjust the position-> "horizontal position", just adjust to the left edge by adding or subtracting the "horizontal position". Backward adjustment position-> "horizontal size", just by adjusting the "horizontal size", the right side is also full. Adjust the position again-> "Vertical Position", and adjust the "Vertical Position" just to the top edge. Adjust the position again-> "Vertical Size", and adjust the "Vertical Size" just to fill the bottom.
After the picture position is resolved, the display effect may not reach the clearest, such as the picture is too white, the color is too bright, or the color is off-color. That's because the color intensity of each game output is not uniform, please use a screwdriver to adjust the potentiometer (corresponding to red, green, blue). The best results can be achieved by adjusting the potentiometer.
Package:
1x Converter Board
