CNC Spoilboard Surfacing Router Bit, 1/2" 12mm Shank 2-1/2" Cutting Diameter, Carbide Insert Slab Flattening Jig Surfacing Router Bit Sled for Woodworking 

Good Material: This drill is made of tungsten steel alloy material, which can open holes quickly. Selected screws and four blade blades are firm and durable, and the round handle chamfer design is easier to clamp.

Cost Savings : All four edges of the carbide blade can be used, and use a screwdriver to turn the other blade edges outward. If necessary, only replace the cemented carbide blade, not the whole drill bit.

Widely Applicable: This drill is very suitable for pine, solid wood, density board, MDF, chipboard, plastic and other materials, and is very suitable for planking, resurfacing or leveling the top surface of the spoil board.

Applicable Equipment: Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc.

Material: Tungsten steel alloy

Colour: Black

Size: 

1.27CM X 7CM X 7.62CM/1/2" X 2-3/4" X 3"

1.2CM X 7CM X 7.62CM/12/25" X 2-3/4" X 3"

Note:

It is recommended to apply to tools with large handle diameter and short cutting edge. Excessive cutting edge will cause vibration and deviation.

If the tool jumps, stop working immediately, reinstall and clamp until it is fully contacted.

The cutter can only be used for wood processing, not for metal, stone and other non-metallic wood processing materials.

The tool handle must be completely inserted into the jacket and tightened firmly, otherwise it is easy to break the tool handle.

Safety facilities such as glasses, ear protection devices, masks and gloves must be provided during operation.

Warm Tips

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!s