Mo.Stop
The tunable
digital brake light modulator for better road safety.
Various
blinking modes turn conventional brake lights into an eye-catching hazard
light. Successive vehicles can much quicker identify the activated brakes of a
leading motorcycle. A considerable plus in motorcycle safety as bikes are prone
to be overlooked. This is especially true with custom bikes and mods with
either small or low riding brake lights. Higher end cars already use this
technology (adaptive brake lights). Very common in here in the USA.
The mo.stop
can also be used as a FLASHER RELAY WITH AUTOMATIC DEACTIVATION! Security
feature.
If
programmed accordingly, the flasher unit deactivates the turn signal(s) after
20 seconds. Say goodbye to accidental continuous turn signals.
Functions
Application
as a brake light controller
• Ultra
compact and light - in essence just a piece of cable attached to a tiny,
candy-sized device
•
Hassle-free wiring into the wiring harness - just connect in series with the
brake light
• 6
different brake light illumination/flashing patterns available
• Almost
load independent - applicable for almost all LED brake lights (min. 1 Watt) or
conventional brake light bulbs
• Utterly
hassle-free connection using only two cables - just connect in series
• Short
circuit proof, - automatic overload protection - protection against voltage
surges from the on-board system
• No heat
generation while operating
• Also
applicable for 6 V brake lights
• Immediate
loss free and brighter illumination of the brake light - water tight and
vibration resistant
Application
as a flasher relay (with or without automatic deactivation)
• Almost
load independent (min. 1 Watt)
• Always
constant flasher frequency
• Therefore
suited for almost all LED turn signal lights, all micro and halogen turn signal
lights as well as all 10-watts and 21-watts turn signal lights etc.
• Ideal for
custom bikes and mods with little mounting space - no bulky conventional relay
• e. g.
works with 4 turn signal lights or 2 handle bar end turn signal lights etc.
• Utterly
hassle-free connection using only two cables - just connect in series
• Also
applicable for 6 V turn signal lights
• Also
applicable as flasher relay WITH AUTOMATIC DEACTIVATION
Dimension
26 mm x 12
mm x 10 mm length of connection cables 2 x 60 mm