Description:
Circular carbide saw blade are widely used for cutting aluminum, wood and plastic materials. This type of grinding machine is used for sharpening many sizes and types circular carbide saw blade. If you change the sanding wheel it can also sharp other common saw blade. It is a necessary assistant machine for cutting aluminum, wood and plastic materials.
Method of operation:
1, loosing the fascia, then adjust the angle of grinding blade and fasten.
2, adjusting of center axle.
Rotating the center axle to the grinding blade.
Pushing the center axle to the right.
Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
Rotating the rotation table to ensure the angle of grinding blade.
The cross angle between the grinding surface and work surface is about 5.
3, adjusting of positioning assembly.
Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia.
Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
4, adjusting the center axle to the same gap of grinding quantity to the right.
5, when all the parts are fastened, the saw blade supported with hand will be grinded.
Safety remarks:
Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers.
The machine should be set in a dry, clean, steady and parallel place.
Release the round plat and then adjust the saw blade angle.
Check all parts that need locks before operation.
After the machine runs well then you can start the work.
Take off the electricity after work finishing.
Feature
Grinding wheel angle control with large aluminum knob.
Will hold each blade head position by a position lock.
Extra 2 blade hole adapter.
X axis feed wheel, stable and very sharp grinding.
Rotary angle mark.
European standard plug, customer needs to prepare conversion plug
Specifications
Power: 370W
Voltage: 220V
Running Speed: 2850rpm
Adjusting Angle Of The Wheel: ±20°
Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right
Working Diameter: 80-700mm
Grinding Wheel Size: 4.92" (125mm)
Bore Size Of Grinding Wheel: 1.26" (32mm)
Sanding Wheel Dimensions: 4.92" X 0.39" X 1.26"X0.2" X 0.08" (125 X 10 X 32x5x2mm)
Product Dimension: 30.3"X16.93"X11.81" (770 X 430 X 300mm)
Package Dimension: 16.93"X16.93"X13.58" (430 X 430 X 345mm)
Voltage | 220V |
Grinding Wheel Size | 4.92" (125mm) |
Bore Size Of Grinding Wheel | 1.26" (32mm) |
Adjusting Angle Of The Wheel | +/- 20° |
Power | 370w |
Handle Turning Angle | 30 degrees from left and 45 degrees from right |
Running Speed | 2850rpm |
Item Size | 30.30"x16.93"x11.81"(72x43x30cm) |
Package Size | 16.93"x16.93"x13.58"(43x43x34.5cm) |
Weight | 55.12lbs (25kgs) |