The EDID/CEC Selector Is A High Performance HDMI V1.3 Device That Allows Users To Set A Firm EDID And CEC Setting, Simplifying Signal Configuration And Synchronization Between Your Source And Your Display. An Easy And Affordable Way To Manage Embedded High Definition Data.

New HD Signals Often Include Embedded Data, Such As EDID And CEC. This Embedded Data Can Often Create Compatibility Problems Between Devices, But With The EDID/CEC Selector, You Are Able To Resolve Many Audio And Video Issues Caused By HDMI Protocol Restrictions.

The EDID/CEC Selector Is Easy To Setup And Operate. Connect The Source Device Via The HDMI Input And Connect Your Display Via The HDMI Outut. A DVI Input Device And Display Can Also Be Used By Using An HDMI/DVI Adapter.

(EDID: Extended Display Identification Data) (CEC: Consumer Electronics Control)

Features:

• Compliant with HDMI 1.3 and DVI 1.0 standards
• Easy, affordable way to manage embedded high definition data
• Serial data rate at up to 2.25Gbps, capable of supporting the following digital video formats in Deep Color Mode at up to 36 bits (12 bits/colour): DTV resolutions - 480i/p, 576i/p, 720p, 1080i/p; PC Resolutions - VGA, SVGA, XGA, SXGA to UXGA
• Supports HD audio - Dolby Digital TrueHD and DTS-HD
• Embedded EDID
• Built-in CEC support with compliant CEC PHY
• HDMI cable distance test with 1080p/8bit or 12bit resolution the input/output can run up to 10/15 meters
• Supports DVI source and DVI Display by using HDMI to/from DVI adapter cable
• Can select EDID source from TV or this splitter
• Support CEC bypass or set EDID manually

Specifications:

• Frequency bandwidth: 2.25Gbps (single link)
• Input Port: 1 x HDMI female port (Type A connector)
• Output Port: 1 x HDMI female port (Type A connector)
• Power Supply: 5VDC/2.6A (CE/FCC/UL certified)
• Dimensions (mm): 97 (W) x 125 (D) x 30 (H)
• Weight (g): 250
• Chassis material: Aluminium
• Colour: Silver
• Operating temperature: 0°C ~ 40°C
• Power consumption: 2.7W