These flexible LED "Noodles" are perfect for lighting up cosplays, figurines, dioramas, and more! Inside the silicone coating is a number of mini LEDs all connected together and secured onto a metal backing allowing for a great range of flexibility

They're connected and powered like a standard through-hole LED. The Noodle needs 3V @ ~50mA, it's good practice to ensure you have a current limiting resistor in series. There's an anode and a cathode, you can tell them apart easily as the anode end has a small hole in the metal connector.

• Qwiic Micro Sized Board (0.75in x 0.30in / 19.05mm x 7.62mm)
• Supply voltage range
  • 1.7 - 3.6V
• Current consumption
  • One shot mode: ~1.7 - 32.2µA
  • Continuous mode: ~2.5 - 783.8µA
• I²C interface (Qwiic-enabled)
• I²C addresses
  • 0x5C (Default), 0x5D
• Water-resistant sensor package
• Dual pressure ranges
  • Mode 1: 260 - 1260hPa
  • Mode 2: 260 - 4060hPa
• Interrupt features
  • Data-ready
  • FIFO flags
  • Pressure threshold
• Output data rate range
  • 1 - 200Hz
• 1x Horizontal Qwiic Connection Port