Description
1. 1 pair (2 bulbs) of new SUPER bright high-quality LED bulbs for a Deere X730, X734, X738, X739, X750, X754, X758, and many others. This is a very common bulb that JD used for almost all of their modern equipment. They fit right into your headlight wiring harness sockets. They super bright, last longer, use less volts, and do not get as hot as conventional bulbs.
2. These modern bulbs have a font projection lens, the beam angle is 360 degrees, have a plastic base, a waterproof gasket, and an alloy body, and are over 1650 lumens each. As a point of reference they are similar in brightness to a 40 watt halogen bulb but they do not get hot and will not melt or burn like a halogen.
3. 100% satisfaction or your money back! See our feedback and purchase with confidence.
2. These modern bulbs have a font projection lens, the beam angle is 360 degrees, have a plastic base, a waterproof gasket, and an alloy body, and are over 1650 lumens each. As a point of reference they are similar in brightness to a 40 watt halogen bulb but they do not get hot and will not melt or burn like a halogen.
3. 100% satisfaction or your money back! See our feedback and purchase with confidence.
Technical Specification:
Plug Type: 881
LED Quantity(each bulb): 6pcs* 2525 chips
Luminous Flux: 6000LM/set (3000LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: fog light/Headlight
Plug Type: 881
LED Quantity(each bulb): 6pcs* 2525 chips
Luminous Flux: 6000LM/set (3000LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: fog light/Headlight
Advantage:
*Latest 2525 (USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
*Latest 2525 (USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
Package Included:
2Pcs LED Bulbs
2Pcs LED Bulbs
Note:
Please make sure you have the same design bulb as pictured.
For a For Polaris older than and including 2004 models these headlight bulbs only fit the upper headlight pod.
For a For Polaris made in 2005 or newer, this headlight bulb is compatible with all 3 headlights. (upper headlight pod as well as the 2 mounted rack headlights)
Please make sure you have the same design bulb as pictured.
For a For Polaris older than and including 2004 models these headlight bulbs only fit the upper headlight pod.
For a For Polaris made in 2005 or newer, this headlight bulb is compatible with all 3 headlights. (upper headlight pod as well as the 2 mounted rack headlights)