Product Features:
199 gears More accurate gearing
Applicable to a variety of nickel pieces
Solder firmly
Improved high-power relay good use of non-fried tube
Instantaneous current up to 1500A
Applicable power supply range.
1. Lead-acid batteries
Lead-acid batteries 12V 14AH-100AH can be used (14AH batteries need to be filled to solder firmly)
2. Faraday capacitor
3.7V 3000F super Faraday capacitors in series with 3 charged to 8V can be soldered (Faraday capacitors are not more than 4 strings maximum)
Three. Car starter
Start treasure output interface must be EC5, peak current 1500A or less
4. Model batteries
Please use XT60 interface, 3S-4S 3000mAh model batteries with a discharge rate of 60C or more
Operation instructions:
Gear adjustment: rotate the encoder to adjust the gear (the number is flashing state), click the encoder to confirm the display for a long bright state, at this time can be welded (gear 01-199 gear)
Switching on and off: long press the encoder 3 seconds to turn on or off
Warning: The first time you use please start debugging from 1 gear slowly up the gear, adjusted to the appropriate gear can not increase the gear at will, to avoid irreversible damage to the motherboard too large gear
0.1mm 0.12mm 0.15mm 0.2mm a variety of nickel sheet thickness can be welded
Package list:
Spot welder kit *1
Nickel tape *1