Water Washable Resin

Printer Setting:

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s

Printer Setting:

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s

Printer Setting:

RGB LCD Screen：

Bottom Exposure:30-80s

Normal Exposure:4-12s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-3.5s

JAYO 3D Resin 405nm UV For LCD/DLP/SLA 3D Printer

Important Safety Instructions:

• Shake the bottle before use

• Recommended temperature 20°C - 25°C

• Protect it from dust and direct sunlight

• Keep it out of the reach of children.

• Avoid skin and eye contact with liquid resin. Wash off immediately with plenty of water if resin gets on the skin.

• Shore Hardness: 70-80D;

• Shrinkage: 6-8%

• Viscosity (25°C)): 210-400MPa·s

• Liquid density: 1.05-1.25g/cm3

• Solids density: 1,195 g/cm³

• Flexural strength: 30±10%MPa

• Extensibility: 20-35 Mpa

• Elongation at break: 20±5%

• Shelf life: 12 months

• Shore Hardness: 80-85D;

• Shrinkage: 7-9%

• Viscosity (25°C)): 210-400MPa·s

• Liquid density: 1.05-1.25g/cm3

• Solids density: 1,195 g/cm³

• Flexural strength: 35±10%MPa

• Extensibility: 20-40 Mpa

• Elongation at break: 10±5%

• Shelf life: 12 months

• Shore Hardness: 80-85D;

• Shrinkage: 6-8%

• Viscosity (25°C)): 210-400MPa·s

• Liquid density: 1.05-1.25g/cm3

• Solids density: 1,195 g/cm³

• Flexural strength: 45±10%MPa

• Extensibility: 30-50 Mpa

• Elongation at break: 11±3%

• Shelf life: 12 months

Colors

JAYO 3D standard resin uses high-quality formulation technology to develop multi-colored resin products with low odor and high flow properties Monochrome Black, Monochrome White, Monochrome Gray, Monochrome Skin, Monochrome Orange, Monochrome Green; clear, clear blue, clear red, clear green A total of 10 colours

Low shrinkage

The shrinkage rate of JAYO resin is between 7-9% and the pressure effect is good. After curing, it can maintain the three-dimensionality of the model for a long time, which is a good manifestation of you bringing out your imagination to the fullest.

High stability

JAYO branded resins are compatible with most 405nm LCD/SLA resin printers on the market due to their excellent performance for general modeling and industrial prototyping