FISCHER C 700 HP PRO 1 FISCHER 410ML MASONRY ANCHORING.

Hybrid Resin Fischer FIS C 700 HP PRO.1, for anchors. FIS C 700 HP PRO.1 is certified for applications on masonry made with solid or semi-solid brick in brick or calcium silicate. It is a chemical anchor perfect also for building applications in hollow or lightened concrete blocks or cracked concrete from class C20/25 up to C50/60. FIS C 700 HP PRO.1 is certified for the use of adhesion bars with a diameter from 10 to 20 mm for the fastening of metal, wooden, for facades, stairs, awnings, canopies and many other everyday applications.

Its performance has been tested by EOTA, the European Organization for Technical Approval, which has certified a minimum product life of 50 years, while maintaining its technical characteristics.

Compared to most resins on the market, the FIS C 700 HP PRO.1 of boasts enormous flexibility in construction applications, with the possibility of being used without loss of strength, from -40 C to 120 C with certified performance at both high and low temperatures.

INSTRUCTIONS FOR USE

FIS C700 HP PRO.1 and T-BOND PRO.1 are bi-component hybrid injection chemical anchors.

Resin and hardener are in two separate containers and are not mixed or activated until extrusion takes place through the mixer.

Before performing the installation, clean the hole as indicated.

Extrude the resin from the bottom of the hole making sure not to leave without air bubbles.

Insert the bar manually by rotating it until you reach the base of the hole.

The resin adheres to the entire surface of the anchor bar and the surface of the hole, sealing it.

The two cartridges are easy and quick to use with fischer guns.

Partially used cartridges can be reused simply by replacing the mixer.

TECHNICAL SPECIFICATIONS

Storage 15 months

Content 410 ml

Unit of scale 180