Electric Vacuum Tin Sucker Soldering Desoldering.Suction Tin Pump Repair Tool
Popular
Product Introduction
Product features:
1. Strong suction: Strong suction, applicable to integrated circuits and large components.
Automatic tin function: It can save you a lot of effort and improve work efficiency.
3. After turning on the power for 3 minutes, the tin removal can be carried out for a long time
4. Simple operation: equipped with long wires and three nozzles, disassembly and welding suction can achieve simple one-handed operation.
5. Simple to carry, light in weight, compact in size, and convenient to use
Automatic tin absorption, fast and convenient, a good helper for improving work efficiency during maintenance
Product parameters:
Product category: Suction Welder
Product material: ABS+stainless steel
Working voltage: AC220V 50HZ
Plug specification: European standard plug/American standard plug
Heater power: 30W
Electromagnetic power: 350W (instantaneous)
Specification of three-piece nozzle: about 1mm/0.04in, 1.5mm/0.06in, 2.5mm/0.1in
Insulation grade: Grade E
Working method: continuous
Product category: Chip level maintenance tools, mainboard maintenance tools, circuit board component disassembly tools.
usage method:
1. Warm up for 3-5 minutes after connecting the power supply
Align the solder joints to be removed and melt the solder
Press and hold the tin suction button to suck the solder into the tin storage cylinder
4. Remove the solder joint from the solder aspirator, and release the solder aspirator button to eject the solder slag
Package list:
Tin suction device * 1+cleaning needle * 1+suction nozzle * 3+instructions * 1
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Electric Vacuum Tin Sucker Soldering Desoldering.Suction Tin Pump Repair Tool
Product Introduction
Product features:
1. Strong suction: Strong suction, applicable to integrated circuits and large components.
Automatic tin function: It can save you a lot of effort and improve work efficiency.
3. After turning on the power for 3 minutes, the tin removal can be carried out for a long time
4. Simple operation: equipped with long wires and three nozzles, disassembly and welding suction can achieve simple one-handed operation.
5. Simple to carry, light in weight, compact in size, and convenient to use
Automatic tin absorption, fast and convenient, a good helper for improving work efficiency during maintenance
Product parameters:
Product category: Suction Welder
Product material: ABS+stainless steel
Working voltage: AC220V 50HZ
Plug specification: European standard plug/American standard plug
Heater power: 30W
Electromagnetic power: 350W (instantaneous)
Specification of three-piece nozzle: about 1mm/0.04in, 1.5mm/0.06in, 2.5mm/0.1in
Insulation grade: Grade E
Working method: continuous
Product category: Chip level maintenance tools, mainboard maintenance tools, circuit board component disassembly tools.
usage method:
1. Warm up for 3-5 minutes after connecting the power supply
Align the solder joints to be removed and melt the solder
Press and hold the tin suction button to suck the solder into the tin storage cylinder
4. Remove the solder joint from the solder aspirator, and release the solder aspirator button to eject the solder slag
Package list:
Tin suction device * 1+cleaning needle * 1+suction nozzle * 3+instructions * 1
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.